Ensure the paths are available from SP-B (check the paths status in powerpath from host side or login status in switch).
If it is available this can be network/service issue,
Confirm there is no IP conflict in the network (ping result is from SP-B only - it can happen that the IP is assigned to some other device and the result is from that device).
Next step you can try opening /setup page, and if it opens try restarting management server.
Support will help you to check the SP status (if it is hung or not) in case if you are not able to isolate the issue. You may register an SR with support for this.
Started seeing the same message. I have an open call. all though connection cannot be made, the I/O is not impacted (at least that is the message with me).
Support is looking at rebooting the CS to see if that clears the issue. One of my partner vendors says there may be an issue with the firmware version.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
658
0
Posted July 3rd, 2013 18:00
is it logged-in to the switch ?