
Solved!
Go to SolutionJB
Jiri.Barta
12 Posts
0
1475
July 9th, 2015 06:00
Manage CIFS users after change interface
Hi, do you help me with my problem ...
I have CIFS with one eth. interface. That I went and added another (different IP address). Since then, does not manage users through the MMC.
When you add back the original, everything works.
VNX5500 - file, FW: 7.1.76-4, 05.32.000.5.215
Thank you for your advice.
Jirka.
Responses (11)
Solutions (0)
Jiri.Barta
12 Posts
930
0
Posted July 9th, 2015 06:00
No two, but change IP address.
On first I remove interface and add new, with different IP address.
Jirka.
Reply Jiri.Barta
12 Posts
930
0
Posted July 9th, 2015 07:00
My steps ...
Create new interface
server_ifconfig server_2 -create -Device trk0 -name eth-new-01 -protocol IP xx.xx.xx.xx 255.255.255.0 zz.zz.zz.zz
Add this interface to CIFS
server_cifs dm-server-01 -add standalone=srv-server-01,workgroup=work,interface=eth-new-01
== Now is manage users through MMC all right. Through OLD interface no. This is OK.
Remove old interface
server_cifs dm-server-01 -delete standalone=SRV-SERVER-01 interface=eth-old-01
== Now does not function manage users through NEW interface. Share is all right.
Reply Jiri.Barta
12 Posts
930
0
Posted July 9th, 2015 07:00
CIFS is standalone.
Both IP addresses I have on local hosts file.
Reply Rainer_EMC
6 Operator
•
8645 Posts
930
0
Posted July 9th, 2015 08:00
Try to unmap share and destroy security context – then map again
Or just reboot the client you are running mmc from
Reply Jiri.Barta
12 Posts
930
0
Posted July 9th, 2015 08:00
zenneosen:
I was try both. From CLI and GUI. Both have same results.
Rainer_EMC:
I was try reboot and another machine, but with same error.
MMC error:
"Unable to access the computer \\srv-server-01. The error was: The
binding handle is invalid."
But share is sucessfuly connectly. I have same login on client and CIFS.
Reply

Jiri.Barta
12 Posts
1097
0
Posted July 10th, 2015 03:00
Problem is resolved.
Problem was in NETBIOS name. If I send request to NEW interface, server return NETBIOS as OLD name = OLD interface. After change NETBIOS name, all is all right.
Thank you, Jirka.