UNSOLVED

RonMcDot

updated

15 years ago

R

RonMcDot

1 Message

0

1069

March 19th, 2012 14:00

"Failed to find the VNXe system that contains the LUN at Target..."

I'm getting this error message in my vSphere client on the EMC VSI tab when I click on either of my two configured datastores on my VNXe 3100.  I'm wondering if I have a configuration issue on my VNXe or ....  My vSphere client is 5.0.0.

  • LeeMC2

    25 Posts

    286

    1

    Posted March 27th, 2012 05:00

    My first guess would be that the VNXe has not been discovered by VSI.  Within the vSphere Client, please go to Home > Solutions and Applications > EMC and then click on the "VNXe Systems" link in the left navigation box.  This should present you with a list of the VNXe systems that are known to VSI.  Is your VNXe in this list?  If not, please discover it by adding the IP address, username, and password.  If the VNXe system is listed properly and you are still having the issue, then please reply to this post to let us know.  Thanks.

    Lee

  • Shivanand1

    70 Posts

    286

    1

    Posted April 3rd, 2012 13:00

    Is this about the VSI Storage Viewer you are referring to?

    If so, install the uemcli on the client you are running the Vsphere client and try to add the VNXe again and revert back if you still have the same error. Also could you please provide the error message you are referring above.

    You can download uemcli from https://support1.emc.com/downloads/downloads_landing.htm (VNXe Unisphere CLI (Windows 32-bit)

    Regards

    Shivanand