UNSOLVED

firozg

updated

11 years ago

F

firozg

41 Posts

0

1125

February 2nd, 2016 07:00

ETA 209725: VNX2: Solid state disk drives with disk drive firmware version 0327 may experience coherency errors after array power down which may result in potential data loss. (000209725) Version:3

Just starting this discussion to know if this drive firmware upgrade on SSD drives on VNX7600 will need an SP reboot? I have used USM in the past and did flare/MCX upgrade which reboots the SP but never got a chance to do disk firmware upgrade. I raised a live chat with support and they said this will require an SP reboot one at a time but i believe the support engineer wasnt sure.

I uploaded the disk firmware and the latest USM says SP reboot is not required. so i confused.

Can anyone let me know if this will reboot my SPs on VNX7600.

PS: I have got a Celerra attached on this system but its not in production

regards

Firoz

  • EvgenyM1

    51 Posts

    579

    1

    Posted February 2nd, 2016 07:00

    Hello!

    I did this upgrade for more than 10+ arrays and reboot is not needful for activate the new firmware for disks. I'm sure.

    From other hand I did it for 5600 and 5200 arrays. I dont think so that you need reboot for 7600. So if USM says you dont have to reboot, you can avoid that. I trust to USM in that case. Actually I did upgrade not for only this particular issue, but each time for firmware upgrades you dont have to reboot SP. Only if you upgrade firmware for FLARE.

    The answer is you dont have to reboot SP in case of upgrading of firmware for disks.

  • firozg

    41 Posts

    579

    0

    Posted February 2nd, 2016 08:00

    thank you very much. I will go by your words