UNSOLVED

af2258

updated

13 years ago

A

af2258

1 Message

1

4632

January 14th, 2014 05:00

Error Code:0x640100d

When attempting to increase a Datastore, the following error
came up;

  Execution Errors:

The system encountered an unexpected error. Record the error
code and go to the Product Support page for support options.

Error Code:0x640100d

Can’t find error code explanation.

  • christopher_ime

    6 Operator

    •

    1962 Posts

    1105

    0

    Posted January 14th, 2014 22:00

    Firstly, welcome to the forums, and above all, thank you for being an EMC customer.


    Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility.  Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.

    You can do so by selecting "Move" under ACTIONS along the upper-right.  Then search for and select: "VNXe Support Forum".

    VNXe Support Forum

    I also tried to search our knowledgebase database and came up short for that specific code: 0x640100d (or even the decimal equivalent: 104861709).  Unfortunately the closest I could find was an error code when renaming a datastore.

    Error code 0x6000d50 while renaming the datastore on VNXe after renaming on the ESX server

    https://support.emc.com/kb/164843

    Once relocated, let's see what others may suggest; however, in the meantime if you haven't already I'd recommend opening up a ticket with EMC support.

  • Leo Li

    4 Apprentice

    •

    9030 Posts

    1105

    0

    Posted January 14th, 2014 22:00

    Hey,

    What is your device using?

    And only EMC engineer and EMC partners can access following solution. If you are using VNXe, you can open a SR to review the solution.

    Error code 0x6000d50 while renaming the datastore on VNXe after renaming on the ESX server

    https://support.emc.com/kb/164843

  • chamley

    1 Message

    1105

    0

    Posted January 21st, 2014 10:00

    Did you ever get an answer to your issue?  I am having the same error when trying to increase a datastore on my VNXe3100.  Thanks for the help!

  • bvhit

    1 Message

    1105

    0

    Posted March 19th, 2014 07:00

    I just encountered this same error while increasing a datastore as well.

    After talking with tech support they indicated that this is an error in automatically updating the size to vSphere.  We were able to manually add the space to the datastore in vSphere and everything seems to be working fine.  The size increased correctly on the VNXe.

  • 1105

    2

    Posted March 20th, 2014 04:00

    Hi Everyone,

         While increasing the size of VMWare datastore, VNXe triggers an automatic API call to ESX to increase the size. If that call fails, then VNXe generates the error message that "extension is completed in VNXe but need to increase the size manually on ESX."

    For this issue, Please check if all ESX hosts are configured properly and showing in 'OK' state in host-->VMWare host page.

    If yes, Please make sure that name of datastore on VNXe and on ESX are identical.

    Resolution:

    - If size has already been increased on VNXe but same is not visible on vCenter, Right click on datastore on ESX-->Properties and click on Increase option.

    - If you see the LUN listed, finish the wizard. (Please make sure that naa ID and LUN ID of existing datastore is matching with extended LUN information).

    If there are any inconsistency or require any assistance with this, Please open a case with VNXe team.

    Regards,

    Swapnil