UNSOLVED

mostafatarabay

updated

13 years ago

0

758

April 1st, 2014 00:00

Bad EMC Support service in meddel east

We Purchase an EMC VNX 5300 series for our business (Hyper-V, Exchange, File Sharring and Backup) with three years paid technical support, then equipment delieverd in Dec. 2013 and Installation of Hardware done in Jan. 2014, then till now April. 2014 we can't use the EMC solution due to there are no EMC business configuration team available.

I think it is very bad EMC soution. While we have an old SUN solution from year 2010 and working fine with best support.

So, i advice, if anyone plan for install new EMC Solution or Transferring to EMC, you must have an EMC certified employees into your company, Otherwise you must search for other best solution.

My question: Is there anyone send a CV for EMC certified guy to be employed into our company?

  • ThaboSikwe

    13 Posts

    403

    0

    Posted April 1st, 2014 03:00

    I see.

    What sort of experience are you looking for? I can refer some of my colleagues I used to work with from a global team.

    Maybe change the subject of the discussion, you might be able to grab people's attention.

  • ThaboSikwe

    13 Posts

    403

    0

    Posted April 1st, 2014 03:00

    Hi Mos,

    Am surprised you're experiencing such from EMC, you say.

    Have you tried getting hold of your EMC Account Manager, they should be able to help you out.

    I will forward this to our South African Account Manager as well as the Senior System Engineers, hopefully they can help you out.

    Thanks.

  • 403

    0

    Posted April 1st, 2014 03:00

    Hi Thabo,

    If i have any help from our EMC area account manage, so i don't decleare my problem.

    So, i think my problem not fixed untill i found someone certified from EMC to be attached into our company team and be employed on-primesis into my site. Otherwise EMC can't help me.

    Thanks for your advice and trying to help me.

  • 403

    0

    Posted April 1st, 2014 03:00

    I'm looking for experience between EMC LUNs and MS-Clustring Service for more Hyper-V nodes.

    Thanks.

  • SuhelaDighe

    1 Rookie

    •

    70 Posts

    403

    0

    Posted April 1st, 2014 04:00

    I moved this post to the VNX support community, where you should get some answers. (The EMC Forum community you posted to is about the EMC Forum event series, which will not help to get technical support.)

  • 403

    0

    Posted April 1st, 2014 04:00

    Thanks for helping me.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    403

    0

    Posted April 1st, 2014 06:00

    are you experiencing technical issues with your array, your question was moved to support forum area of ECN.