Unity 450F - FC ports change speed 8Gbps to 16Gbps
Hi all!
After the performace a migration activity from old brocade BS5300 switches to new brocade BS6520 switches , now we can sync up 16Gbps.
From storage side (Unity 450F) initially we hace FC port (for both SP) with 8Gbps. Now we want change this speed for the Unity can sync with the two new switch up 16Gbps.
Does it impact this change from Unisphere?
Does it will be loss the port initiators synchronism? It's this a clean change?
You can change the port speed using unisphere. It is best to change ports one at a time & allow 60 seconds in between changes to ensure that there are no issues. It is also best to do this during low IO time to ensure that there are no issues.
Please let us know if you have any other questions.
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
949
0
Posted February 26th, 2020 08:00
Hello InfraMED,
You can change the port speed using unisphere. It is best to change ports one at a time & allow 60 seconds in between changes to ensure that there are no issues. It is also best to do this during low IO time to ensure that there are no issues.
Please let us know if you have any other questions.