But the problem is we can't update our Linux servers (both R720s and M620s) using bmcfwul utility:
iDRAC7 Firmware Upgrade Utility Version: 1.30.10.21427 Copyright 2013 Dell Inc. All Rights Reserved. Firmware Version Current Image 12G iDRAC7 BASE V1.00 Firmware Version 1.50.50.34 1.56.55.05
Detecting USB Device timeout USB Device is not found Detecting USB Device timeout USB Device is not found Detecting USB Device timeout USB Device is not found Failed to access Virtual USB Device
But if we trying to upgrade from v1.51.51 - everything goes fine! Also it's possible to update 1.50.50 to latest version through DRAC WEB GUI, but it requires vFlash card installed - and we do not have it on all chassis.
Does anyone was faced with similar issues on Linux?
It's Ubuntu 12.04, racadm is installed from dell apt repos, racadm v7.1.0 I took latest RHEL DUP file ESM_Firmware_V554G_LN_1.56.55_A00.BIN. unpack it using --unpack, and took files /x64/bmcfwul and firmimg.d7, then I running fw upgrade with sudo ./bmcfwul -i=./firmimg.d7
I can't run racadm fwudate directly because is also failing: # racadm fwupdate -p -u -d ./firmimg.d7
sh: bmcfwu.so: command not found
And when I trying update drac fw on M620 using CMC web gui on m1000e I got next error -
" iDRAC7 server updates require that the Extended Storage feature is enabled". Also I see that message in Instructions :
Dell Update Packages (DUP) that are less than 48MB are supported. The Extended Storage Feature is required for larger DUPs. For more information see the following link Extended Storage Feature
Yes. Updating iDRAC from CMC need Extended Storage card installed on CMC. I would recommend to use iDRAC web GUI or remote racadm for updating iDRAC FW.
NOTE: The current version of Integrated Dell Remote Access Controller (iDRAC) that do not support the execution of RACADM commands. Contact Dell customer service to upgrade to iDRAC Express or iDRAC Enterprise The installed version of RACADM client executable that do not match the
I update fw to 1.55.56 successfully everywhere, using or CMC Web "Update" menu (where I has Flash cards installed), or through direct Web iDRAC "Uprade and Rollback" menu. Yes, both are manual but I found no other option.
The GUI is not an option in my case due to another issue\bug wit 1.50.50 - see the other thread.
racadm I am using is v.7.3.2 and it keeps on returning despite various ideas:
NOTE: The current version of Integrated Dell Remote Access Controller (iDRAC) that do not support the execution of RACADM commands. Contact Dell customer service to upgrade to iDRAC Express or iDRAC Enterprise The installed version of RACADM client executable that do not match the generation of the server.
On a windows machine I installed RAC tolls from the latest version and then:
C:\Windows\system32>racadm
.............................
=============================================================================== RACADM version 7.4.0 (Build 866) Copyright (c) 2003-2013 Dell, Inc. All Rights Reserved ===============================================================================
...........................
Followed by -
C:\Windows\system32>racadm -r 192.168.3.168 -u -p getsysinfo Security Alert: Certificate is invalid - Certificate is not signed by Trusted Third Party Continuing execution. Use -S option for racadm to stop execution on certificate-related errors. ERROR: Unable to connect to RAC at specified IP address.
I can ping the above address and I can even browse to it and get the idrac landing page. By extension the fwupdate command unsurprisingly has the same results. What an annoying little problem the update process is becoming
DELL-Shine K
6 Operator
•
3042 Posts
4059
0
Posted April 7th, 2014 10:00
Can you let me know which flavor of Linux OS installed on the server. Also let us know the racadm version and command used for FW update.
There is no need to install vFlash card for updating iDRAC Firmware through GUI.