UNSOLVED

riddoch

updated

25 years ago

R

riddoch

2 Posts

0

16566

March 11th, 2002 18:00

Bios Upgrade through Openmanage IT Assistant


Open manage appears to have the ability to upgrade a systems Bios hoever I am unable to find current bios's on Dell's web site.

Sure I can find the make a floppy disk etc versions but what I'm looking for appears to be a HDR file since that is the file type that IT assistant asks for.

Where can you download these files so we can flash bios's remotely?

Thanks



  • jmichaels

    1 Rookie

    •

    14 Posts

    670

    0

    Posted March 12th, 2002 11:00

    The HDR file is inside the file you get when you download the floppy disk version.

  • riddoch

    2 Posts

    670

    0

    Posted March 12th, 2002 13:00

    The floppy disk versons that I have seen contain files along the list below. There have not been any HDR files.

    Examples Below:

    ******************************
    C600 Latitude Floppy
    ******************************
    IO.SYS
    MSDOS.SYS
    DBLSPACE.BIN
    COMMAND.COM
    UPGRADE.INF
    UPGRADE.EXE
    C600_A20.EXE
    C600_A20.TXT
    AUTOEXEC.BAT

    ******************************
    GX150 Optiplex Floppy
    ******************************
    IO.SYS
    MSDOS.SYS
    COMMAND.COM
    DBLSPACE.BIN
    AUTOEXEC.BAT
    GX150A09.EXE
    Release.txt


  • coiteaux

    2 Posts

    670

    0

    Posted March 12th, 2002 14:00

    You have to create the HDR yourself from the EXE file usually used to update your BIOS with floppy disks (Ex: GX150A09.EXE). To do that, execute your EXE file in that way in a command prompt: -writehdrfile and a .hdr file will be created.

    Once again, READ YOUR DOCUMENTATION. Almost evereything you need to know can be found there, including How to Flash your Bios remotely.

    Beep! Beep!

    Message Edited on 03/12/02 11:09AM by coiteaux
  • Clirion

    1 Message

    670

    0

    Posted November 5th, 2003 14:00

    Ok I have tried to make the HDR File for the remote upgrade.

    I have used the Floppy version of the download. With the -writehdrfile option. No joy no HDR File.

    I have tried using the HD Version. The HDR File that is created is for install sheild. Again no joy.

    I have tried the bios file that is created when you create the floppy. Simply closes the Command prompt. No Joy..

    I have downloaded the slipstream file (its the same one that is created on the floppy drive) No Joy.

    I have found the changes for _default.pif, made those changes to the and tried all 3 files again. With the same results. I am running out of options here, if anyone has any suggestions I would appricate it.

    The remote bios I am trying to create is for the Optiplex 260.