Mannie1962

updated

13 years ago

0

1724

June 3rd, 2013 03:00

SYMCLI command SRDF - info

I'm searching for a SYMCLI command for info about an invalid SRDF-group. With symdg show DgName and symrdf –g DgName que, I get no result.
05/31/2013  14:29:02.254   7304   7384 EMC:SYMRDF

emcSymValidateGroup Group: (GroupName) is invalid because there are mixed type std devices;

  • pete2c

    1 Rookie

    •

    76 Posts

    1088

    1

    Posted June 3rd, 2013 07:00

    You could do 'symdg exportall -f ' to export the group information to a file.  Then check the devices by doing a symdev show of each.  Chances are some are RDF (R1 or R2) and some are not.  If the group is a type 'RDF1' for example, all source devices in the group need to be R1's.  If any are not, you'll get an invalid group.

  • RRR

    6 Operator

    •

    5739 Posts

    1088

    0

    Posted June 3rd, 2013 06:00

    So you want to find out which of the devices in this device group cause this behavior? So you need a listing of the devices in this device group.

    You could try exporting the DG to a file and see which devices are different from the others.

  • 1088

    0

    Posted June 3rd, 2013 23:00

    Hello pete2c,

    THX, this is exact the command, what I was looking for.

    With symdev show I discovered that 7 devices are not RDF1.

    Kind regards,

    Manfred

  • RRR

    6 Operator

    •

    5739 Posts

    1088

    0

    Posted June 4th, 2013 08:00

    so it was the export I suggested after all?