UNSOLVED

Sammie4

updated

17 years ago

S

Sammie4

44 Posts

0

1340

November 12th, 2009 08:00

Can windows 2000 and 2003 run with port changes for windows 2008?

The windows 2008 port bit setting requires c, os2007, sc3, and sp2.
I have varied two ports offline and made the required changes and currently have a windows 2008 server running on them. My question is this: Can I run windows 2000 and 2003 on these same ports? Has anyone had any issues with this?
If not then I'm looking at varying all current windows ports offline and making the change to also support windows 2008. Any input is appreciated.
  • 604

    0

    Posted November 12th, 2009 08:00

    Hi Samantha,

    I think it shud not...

    Windows
    default
    scsi flag C D SC3 SPC2 (to make the same as sun D is added)
    fibre flag H PP UWN VCM EAN
    scsi flag on HBA online symmask -sid -wwn set hba_flags on os2007,spc2 -dir -p -enable
    scsi flag on FA offline SCSI_Support1=enable (OS2007) SPC2_Protocol_Version=enable (SPC2)
    EAN Auto_Negotiate should be enabled through symconfigure
    symcfg -sid xxxxx -sa xx -P x offline
    set port 4a:1 SCSI_3=enable;
    set port 4a:1 SCSI_Support1=enable;
    set port 4a:1 SPC2_Protocol_Version=enable;
    set port 4a:1 auto_negotiate=enable
    Additionally for Windows 2008 Failover Cluster, the Persistent Reservation attribute SCSI3_persist_reserv must be enabled
    on each Symmetrix DMX device used. set device XXXX attribute=SCSI3_persist_reserv ;
    set port 4a:1 SPC2_Protocol_Version=enable;
    set port 4a:1 auto_negotiate=enable
    Additionally for Windows 2008 Failover Cluster, the Persistent Reservation attribute SCSI3_persist_reserv must be enabled on each Symmetrix DMX device used. set device XXXX attribute=SCSI3_persist_reserv ;
  • Sammie4

    44 Posts

    604

    0

    Posted November 12th, 2009 09:00

    Is it possible to discuss with you via telephone about this because you have some extra parameters that were not required when I changed my port settings.
  • 604

    0

    Posted November 16th, 2009 00:00

    Hi Samantha,

    Can u please elaborate which exact setting you are talking about?

    Many Thanks,

    Vivek

  • Sammie4

    44 Posts

    604

    0

    Posted November 16th, 2009 06:00

    Can you give me an example of setting all the windows 2008 parameters using the symmask command for windows cluster failovers.?
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    604

    0

    Posted November 16th, 2009 06:00

    on the FA set flags that are supported by each OS and then add OS/cluster specific flag via symmask. For example:

    symaccess -sid 031 set hba_flags on C,SC3 -enable -wwn 210000e08b0995b7-dir 16A -p 0

    this command enables Common_Serial_number and SCSI_3 flags just for that specific HBA.

  • Sammie4

    44 Posts

    604

    0

    Posted November 16th, 2009 06:00

    Can you give me the symmask command to set the port flags via hba wwn?

    Also....can you tell me if I can run 2000, 2003, and 2008 on the same FA's if I make the 2008 changes required at the FA level?

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    604

    0

    Posted November 16th, 2009 06:00

    what flags do you currently have set on your FAs ?
  • Sammie4

    44 Posts

    604

    0

    Posted November 16th, 2009 06:00

    I only have 2 fa's that I have changed to port bit settings to support windows 2008.

    c,os2007,sc3 and spc2.  SC3 was already enabled.

    My original plan was to take an outage and change all windows FA's to support 2008 but then I heard about the SCSI3_persist_reserv bit that needs to be set since we run windows cluster failover.

    I'm not a windows person so I don't know about how to do this.

    Also.....I want to ensure windows 2000, 2003, and 2008 can run on the 2008 changed FA's.

    Hope this helps and any help is appreciated.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    604

    0

    Posted November 16th, 2009 17:00

    the FA flags you mentioned are supported by Win2k, Win2k3 and Win2k8 so you are good there. If you are going to use Microsoft Clustering in Windows 2008 then you will need to set persistent group reservations on devices that will be used by the cluster. The command is:

    To enable the attribute,

    • set device SymmDevNum attribute=SCSI3_persist_reserv;

    To disable the attribute,

    • set device SymmDevNum attribute=NO SCSI3_persist_reserv;