UNSOLVED

stevespace_9

updated

18 years ago

0

6552

April 29th, 2009 22:00

When I try to use my A: \ floppy drive I get the error mess. its not accessable, no id address mark found on the floppy disk.

How can I easily solve this? I have never messed with the inside of the computer  except to install more memory. I've googled this problem and the solutions posted are way too complicated for a novice like me to solve. I went through a box of 10 floppy disks. Can someone give an easy solution to this problem?

Specs: Demension 3000, XP Home Srvc Pack 3, 1GB ram & in the 4 yrs I've had the computer I've never used the floppy A drive until a days ago.

Thanks in advance. 

Steve

  • osprey4

    6 Operator

    •

    34230 Posts

    264

    0

    Posted April 30th, 2009 18:00

    Hi, Steve:

    There are two possibilities. One is that your drive has gone bad. Try running the Dell diagnostics on your floppy drive with a diskette that you know works on a different computer. The diagnostics will tell you whether the hardware is good apart from the operating system.

    The second possible solution is described in this article. In order to implement the fix, you need to modify registry settings. There is a link in the article on how to back up your registry before you tinker with it, so make sure you do that. Although the fix is tedious, if you follow the instructions EXACTLY, it is not hard.

    Please post back and let me know if that worked. The other question I have is, why in the world do you need to use the floppy drive? :emotion-16: A $5 1GB flash drive is much more reliable.