UNSOLVED

Gt2020Mb55

updated

23 years ago

0

6528

October 3rd, 2003 01:00

Noise from new D600

I just ordered a brand new D600 to replace a Compaq Presario 1500 ... i love the size and weight compared to the compaq ... however i hear a clicking noise constant click click clack click clack .. i think it is the hard drive writing ..i have never heard this on the compaq or my dell desktop but i do remember the same sound coming from a P3 Optiplex a few years ago ... I need to use the laptop for school and this noise may be a little loud ... does anyone know if the hard drive is the problem ? It even sounds like it is coming from the left palmrest ???

Dell 4300s

P4 1.8 Ghz -  512mb - 40Gb HD- CD/RW

Dell 8300

P4HT 3.0 Ghz  800mhz FSB - 1.5 GB DDR 400Mhz - 80Gb HD - CD/RW- DVD/RW

Dell D600

PM 1.3 Ghz - 512mb - 20Gb HD - CD/RW -DVD

Compaq Presario 1500

P4 2.4 Ghz - 512mb - 60Gd HD - CD/RW - DVD - Fan louder than my grandma's old dishwasher

C

  • DELL-Corey

    1 Rookie

    •

    2570 Posts

    174

    0

    Posted October 3rd, 2003 14:00

    Gt2020Mb55,

    Thank you for using Dell's Community Forum.

    You may want to run the Dell diagnostic program to check the HDD’s integrity.
  • dlo

    5 Posts

    174

    0

    Posted October 4th, 2003 22:00

    I'm having a similar problem, though I'm not clear whether it's the hard drive or coming from some other source.  The "click" mainly seems to happen whenever I go to a new web page.  Something related to my wireless network? (though this type of noise doesn't make sense for a network issue, I don't think).  It doesn't happen when I access the hard drive because I'm kicking off an application or saving a file in, say, Microsoft Word.  Thus I'm not sure that it's the hard drive, but the noise is certainly annoying...

    Any others out there with "click" sounds coming from a D600?

  • dlo

    5 Posts

    174

    0

    Posted October 4th, 2003 22:00

    Well...I investigated on another forum, and found out that, sure enough, the click is happening only when I click on a link to go to another web page.  It ends up that the default sound scheme for the D600 has a sound set for "Start Navigation" in Windows Explorer is this annoying "click" sound.  I went to the Control Panel, Sound and Audio Devices, then clicked the Sounds tab, scrolled down to Windows Explorer, then chose "none" for the sound for "Start Navigation."  No more click!

    Thanks to the folks on the Dimension board who posted their response to this issue for desktops since it's a Windows issue. http://forums.us.dell.com/supportforums/board/message?board.id=dim_other&message.id=88264&highlight=click+click+click#M88264

     

  • 174

    0

    Posted October 4th, 2003 22:00

    Well a few minutes after i posted that the brand new D600 began to crash everytime i turned it on .. and i started recieving blue screens hlaf the time... well i called technical support and the hard drive is being replaced Monday morning .. they said this should solve the problem with the noise and crashing... for the inconvenience they are upgrading me to the next level HD. Hope my problems are solved ! Dell Tech support is great and the reason i have 3 new Dell computers
  • ghamarneh

    1 Message

    174

    0

    Posted November 24th, 2003 18:00

    I have a Latitude D600, ~1 month old .  I am also hearing a click/clunk sound coming from the left side of the laptop (by the headphone and mic jacks) which is where the harddisk is.  It is annoying and scary... It just doesn't feel right. I have heard it twice during the past 24hrs when I was using remote desktop to my work machine, so mainly I wasn't doing any reading/writing locally (but of course there are some local disk system activities going on...).  I just heard it again right now!

     

  • 174

    0

    Posted December 1st, 2003 12:00

    If your hard drive is made by IBM, this is a normal process of the drive. It is most likely the heads posistioning/parking themselves somewhere in your drive.
  • 174

    0

    Posted December 1st, 2003 12:00

    Run a thoruogh diagnostic utility to be certain. The noise most likely is the normal buffering of the arm reading/writing over the platters.