UNSOLVED

gtobobb

updated

23 years ago

G

gtobobb

6 Posts

0

15776

May 8th, 2004 20:00

nec nd-1100a records only at 2.4x and not at 4x How ABOUT A REAL FIX DELL & NEC

I have the nec nd 110a 4x dvd writer
I have the same problem as everyone else with the nec nd-1100a burning at 2.4x. Got 3.o6 gighrtz
with 1 gig of 1066 rdram etc. Just bought nero ultra 6 fri may 7. burned a video dvd and it burned at 2.4x. also used roxio ezcd platinum 5 with all upgrades still 2.4x. I see that other people in this forum have done a firmware update and still 2.4x. i've used verbatium, tdk,& memorex dvd disks
still 2.4x. I ran a test for rec. speed with nero (wasted a dvd) and still burned at 2.4
I think all dvd's must conform to some standard, so we all could choose brand or price and still do what we want to do for our project. To me it really seems that Dell and Nec has just gave us all
a bunch of CRAP about 4x recording with this recorder. Updates Dell dosen't seem to tell too much
when you read the discription, ha ha fix 10 something--write on black disks. HOW ABOUT A REAL FIX
so all off us who paid for something, and didn't get what we paid for---4X RECORDING. I'm new to this board, and most likely be booted off soon. Just like my 8250 the video card has a pipeline of 8x . Dell's motherboard only supported 4x, they didnt tell you, my rep.told me that i did read the specs.I still bought it and I'm happy with it except 2.4x record. DELL AND NEC HOW ABOUT A REAL FIX
4X RECORDING & Bring back American support people. Sorry to drone on just alittle tired of being handled---Bob
Opps: Yes I did use 4x disks
  • Robert Moyer

    2 Intern

    •

    933 Posts

    154

    0

    Posted May 9th, 2004 08:00

    I would like to make a comment here .It is not advisable to have Roxio and nero ultra 6 on the same computer. Get rid of Roxio and go into Nero and get the new  dates they are four of them(.I don't care if you bought it May 7 you still need the updates)I have used Fuji media and have excellent results. Of course I am using A Plextor Px708 A ,When I use 4x media ,the plextor burns at 8X  total time about 9 minuters instead of 23 minutes burning at 2.4 x I had a Nec 1100 a and i used it for 2 months and i finally took it out and put it back in the box and put it upstaires in the attic ,I will put it in a yard sale this summer ,I could not put up with all the aggravation. I then went out and bought the Plextor and never as of yet made a coaster, I have made over 40 movies with the Plextor and the sony 500a
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    154

    0

    Posted May 9th, 2004 09:00

    Nero and Roxio will co-exist on the same PC without problems.  The only thing, you can only have one UDF burning program, either the Roxio Direct CD (or drag to disc with newer versions) or the Nero "InCD" application.  I have Roxio and Nero both on my PC and there is no interaction, I did not install the Nero InCd and instead have the Roxio UDF application installed.  Actually, I could uninstall the Rocio UDF program too, as I don't use CD-RW discs or the UDF function for CD's or DVD's, just the regular audio, data, (dvd) video applciations.
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • Robert Moyer

    2 Intern

    •

    933 Posts

    154

    0

    Posted May 9th, 2004 09:00

    I said it was not advisable  to have both on the same computer, People who are inexperience could run into problems, We have enough problems with computers ,with out  looking for trouble

    Message Edited by Robert Moyer on 05-09-2004 07:41 AM

  • jonville

    62 Posts

    154

    0

    Posted May 11th, 2004 04:00

    Can you give us more information about your config? 

    Is there any other drive (DVD-ROM, CD-ROM, etc) on the same channel as the DVD burner? 

    If so what are they?  You can probably find this out using Roxio, Nero, or by running MSinfo32.

    Another thread said they were able to improve the performance in a system with two drives on a channel (secondary) by setting the jumpers to Master and Slave instead of Cable Select (CS).  I am not sure how this would fix the performance problem but it seems to have worked for some people.

    It may be easier (if you have a dual drive config) to see if there is any performance change if you just have the DVD burner on the channel by itself and take out the other drive.

     

  • gtobobb

    6 Posts

    154

    0

    Posted May 12th, 2004 20:00

    >I really hate to get on Dell and nec, but something must be wrong somewhere when I see about 400 hundred people looking at my post, Bob Moyer's ,Firebird,and Jonville. I honestly haven't put any firmware updates in (NEC) the burner, not worried about burning on a black disk, but it seems that it makes no difference, since so many other people seem to have the same problem. It still burns at 2.4x. I don't think it makes a difference if you have a 1.8 gig hrtz machine or say a 3.4 gighrtz computer. just takes longer for less processor. If anyone one is gettting 4x burn out of the nec 1100a let us all know how your doing it. For those who say Roxio and Nero shouldn't coexist on the same computer maybe your right. Roxio does want to be the only program on your machine. I had only Roxio ezcd platium 5 with all upgrades only on this machine and I still burned dvd's at 2.4x. Loaded Nero's Ultra 6 last friday and also installed all their available upgrades at the same time.
    Only program that didnt load was INCD. It said I had to install direct9 from micrsoft. What is our config? 8250 3.06 gighrtz 128 mg radeon 9700tx, 1 gig rdram 1066, 2- 120 gig harddrives one with 2 mg of ram and the other with 8 mg of ram, Pinnacle Studio version 8 deluxe (exspensive but real nice software and digital & analog card) 16x samsung drive and the nec 1100 a, soundblaster and hauppauge wintv pvr 350. I think we have enough computer. I also shut down all unneaded programs. not a newbe. have had since 1989 an 286, 386, p100, p133, p933, and now p 3.06 and if they had something faster at the time, it would be ours. Just like our cars (66 goats conv tri-power 4spds) we like hoarse power under the hood. I'm not saying we are pro's , just know enough to get into trouble. I really like the plexter 8x & I hear they also have a 12x burner, that would solve our problem, but then I would have another one with the wife. IF ANYONE IS BURNING AT 4X PLEASE LET US ALL KNOW HOW YOU DONE IT. Wasn't trying to shout but trying to make stand out from my other chit chat. STILL LIKE DELL, but I don't like the outsourceing to people I can't hardly understand and they me. Dell's support was always top notch that's also why we bought dell.
    Sorry for all the bablim and sorry for the one bad word in my original post,got carried away Bob
  • khisel

    41 Posts

    154

    0

    Posted May 13th, 2004 02:00

    > Opps: Yes I did use 4x disks

    The NEC 1100 is very picky about media. Stick with these brands and your 2.4X days are over:

     

    Verbatim Datalife

    Maxell

    Ricoh

    Sony

    TDK

     

     

  • jonville

    62 Posts

    154

    0

    Posted May 14th, 2004 13:00

    gtobobb,

    Have you tried to see if you get any performance gain by having just the NEC DVD burner on the system? 

  • gtobobb

    6 Posts

    154

    0

    Posted May 16th, 2004 17:00

    I've used tdk & verbatium disks before but that was with roxio. this week I'll buy some and try it with nero. i know that people with 8x plaxter's are getting 8x with 4x disks with nero. by the way
    I do have roxio & nero coexisting on the same computer. I will pull out roxio if i don't get a 4x burn. than if that dosen't work I'll pull the 16x drive either by pulling the hot wire or by uninstalling it under hardware . let you all know later this week sometime. pulling the 16x drive I don't think will make any difference, since it's not used when the dvd burner is used . this none of us should have to do , but will try anyway. will keep all informed----Bob
  • jonville

    62 Posts

    154

    0

    Posted May 16th, 2004 20:00

     Make sure that the DVD burning is in the master possition (on the end of the cable) on the IDE cable.  I am not sure if the DVD-ROM or the DVD burner comes in the system as the "master" "AKA  "device 0" to be PC.  Thanks for trying out this data point (if it comes to that).  The OS still issues commands to the non-burning drives during burns to check its status. If the DVD-ROM does not respond correctly or there is a problem between the drives then you can have delays.  I wouldn't bet my mortgage on it but it is a good data point to have. 

     

     

  • gtobobb

    6 Posts

    57

    0

    Posted May 17th, 2004 21:00

    Jonville When I put in my 2nd hard drive the drives were configured as cable select. I would bet that's the way the dvd-rom & dvd-burner are setup, but I also have lost bets too. I hate to take the cpu out of desk cabinet, too many wires. -- Bob