UNSOLVED

RZS

updated

21 years ago

R

RZS

53 Posts

0

32886

August 17th, 2005 03:00

NEC 6500A on XPS GEN 2 - All burning software says max is 4X?

Can anyone help me with this?

It seems that no matter which application I use to make DVDs, that the maximum detected speed is 4X (and this is with certified 16X media... which I was able to do on a separate desktop here).

Any thoughts?

Thanks
  • bacillus

    2 Intern

    •

    14378 Posts

    825

    0

    Posted August 17th, 2005 08:00

    You'll need to use the "approved" DVD media in order to get the maximum out of that 6500.

    http://www.de.nec.de/software/1687_ND-6500A_Medialist_2_22.htm

     

  • RZS

    53 Posts

    825

    0

    Posted August 17th, 2005 12:00

    Hi,

    Thanks for the list, but I am actually using approved media, I've been using 16X Taiyo Yuden from the getgo.

    The thing is, even on drive diagnostic programs, it reports (without any disc inserted) that the drive's mazimum speed is 4X?

    I've updated the firmware, and checked to make sure I am using the latest versions of the applications, and still no go.

    RZS

  • bacillus

    2 Intern

    •

    14378 Posts

    825

    0

    Posted August 17th, 2005 17:00

    hmm, has your drive slipped into PIO mode?
  • RZS

    53 Posts

    825

    0

    Posted August 17th, 2005 17:00

    Hi,

    I checked that also, but decided to double-check, and no, it's showing as Ultra DMA Mode 2.

    I can't figure this out!!!

    :smileymad:

    Thank you for helping me though. 
  • sport46

    21 Posts

    825

    0

    Posted August 18th, 2005 01:00

    I am also getting 4x write speed on this burner. I ran a diagnostic program and it only reports 4x without any disc in it. I dont know why dell is selling this drive without the proper drivers. After all I ordered the dvd burner for my laptop because it said 8x.
     
    I am using certified Sony 8x dvd+r made in japn media coded as Yuden and still it only burns at 4x. Firmware from dell 203D.
     
    Any one who is able to burn at 8x with the dvd-burner please reply
     
    Thanks in Advance
     
     

    Message Edited by sport46 on 08-17-2005 09:32 PM

  • RZS

    53 Posts

    825

    0

    Posted August 18th, 2005 01:00

    Yeah, just for the record, I am also using the 203D firmware, and I don't think anyone will question Yuden quality.

    I only settled for this drive because of the 8X rating, I would have thought twice about it if I had known what I do now.

    Perhaps it's time for a call into Dell Tech support (we all know how much fun that is!).

    Anyone else have anything to add to this thread?

    Thanks for your input also sport46.

  • bacillus

    2 Intern

    •

    14378 Posts

    825

    0

    Posted August 18th, 2005 06:00

    just a thought but did you by any chance install the windows update HIMAT support?
  • RZS

    53 Posts

    825

    0

    Posted August 18th, 2005 12:00

    I didn't do it purposely... but after checking the logs it IS installed, should I remove it and test again?

    Guess I'm getting lazy  :)   I'll do that anyway!

     

    Thanks.

  • RZS

    53 Posts

    825

    0

    Posted August 18th, 2005 13:00

    Ok, I tried both with and without the HIMAT update installed, and the results were the same.

    Nero is indicating that the drive reports 4X write, and 10X read?

    Message Edited by RZS on 08-18-2005 09:02 AM

  • RZS

    53 Posts

    844

    0

    Posted August 18th, 2005 17:00

    As an update, I also ran several identifiers and they all report the same thing.

    MEDIA: Taiyo Yuden TYG 03 16X
    DEVICE OPTIONS: 4X, 2X (NEC 6500A)

    I'm going to call Dell about this and hear what they say.

    Thanks for the input everyone.

    RZS