
UNSOLVED
P
puri_malluru
8 Posts
0
4776
February 21st, 2004 22:00
How to change boot sequence from SATA drive to UDMA drive in Dimension 8300?
Hi,
I am using Dell Dimension 8300 with SATA drive on SATA primary and a UDMA drive on Primary IDE channel. The system is always booting into SATA drive. I like to change it so that it looks at UDMA disk first and then SATA. I don't see any option in CMOS setup for changing boot sequence from SATA to UDMA hard disk. It says Harddisk and boots to SATA.
I appreciate ur help.
Thanks
Puri
Responses (1)
Solutions (0)

puri_malluru
8 Posts
216
0
Posted February 24th, 2004 13:00
I figured it myself. When you press F12 during bootup, it gives the option of booting from SATA or the UDMA hard disk. If you select UDMA, form that time on, it will boot from its active partition.
puri