UNSOLVED

villain189

updated

21 years ago

V

villain189

1 Rookie

•

18 Posts

0

3097

December 8th, 2005 21:00

Help! Bought 2nd HD for Dim4400

Hey,

Needed a 2nd HD for my Dimension4400...so I bought one off newegg.com.

Not sure if maybe I didn't do enough research...but everything was going smoothly until I went to connect the drive cable and found that the drive cable did not fit into my hard drive!
The connector on the drive cable looked nothing like the input on the HD.

Here's the drive I bought...will this work with my system, or should I have bought something else?

I bought the 80GB version

http://www.newegg.com/Product/Product.asp?Item=N82E16822135106

http://www.wdc.com/en/products/Products.asp?DriveID=83

Thanks!
  • shesagordie

    12 Elder

    •

    46017 Posts

    169

    0

    Posted December 8th, 2005 21:00

    villain189

    The hard drive shown in the following link is a SATA, the D-4400 does not support SATA, unless you buy a PCI SATA controller card [$25-$35] or buy and install a EIDE/IDE/ATA hard drive.

    http://www.wdc.com/en/products/Products.asp?DriveID=83

    Bev.


     

  • villain189

    1 Rookie

    •

    18 Posts

    169

    0

    Posted December 8th, 2005 22:00

    Thanks for the info...guess I should have done a little more research.

    For the PCI SATA controller, would this work?

    http://www.wdc.com/en/products/accessories.asp?DriveID=177

    And how well do these PCI cards work as far as performance? Will I be sacrificing alot by going through the PCI card instead of connecting an IDE/ATA directly to the Drive Cable?
  • shesagordie

    12 Elder

    •

    46017 Posts

    169

    0

    Posted December 8th, 2005 23:00

    villain189

    Yes, the card shown should work, make certain it includes the drivers and manual.  If the SATA cable is not included with the card, then you will need to buy one, plus a SATA power adaptor. 

    Personally, I would just exchange the drive for a EIDE hard drive, far less hassle

    http://www.wdc.com/en/products/accessories.asp?DriveID=177

    Or the unit shown here. This includes the cable

    http://www.newegg.com/Product/Product.asp?Item=N82E16815102102

    Bev.

  • villain189

    1 Rookie

    •

    18 Posts

    169

    0

    Posted December 9th, 2005 17:00

    Thanks for the advice...think I'm going to return that Hard Drive and get a new one.
    Want to make 100% sure they'll work with my system this time though. Here are the ones I'm looking at...probably get the one with the 8MB buffer as long as it's compatible.

    Can someone please check these out and confirm that they will be compatible for use as a 2nd HD in my Dimension4400?

    Western Digital Caviar Special Edition WD800JB 80GB ATA/100 7200RPM Hard Drive w/8MB Buffer
    http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=101206

    Western Digital Caviar WD800BB 80GB Ultra ATA/100 7200RPM Hard Drive
    http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=101318


    Thanks!!!

    Message Edited by villain189 on 12-09-2005 02:54 PM

  • shesagordie

    12 Elder

    •

    46017 Posts

    169

    0

    Posted December 9th, 2005 18:00

    villain189

    Go with the drive shown in this link, it has a three year warranty, the second drive has only a one year. The Western Digital JB series, seem to be good hard drives, I've been using them for several years, without a problem.

    Western Digital Caviar Special Edition WD800JB 80GB ATA/100 7200RPM Hard Drive w/8MB Buffer

    http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=101206

    Bev.

  • villain189

    1 Rookie

    •

    18 Posts

    169

    0

    Posted December 9th, 2005 19:00

    Thanks for the advice!
  • shesagordie

    12 Elder

    •

    46017 Posts

    169

    0

    Posted December 9th, 2005 19:00

    villain189
     
    You're welcome.
     
    Have a Merry Christmas.
     
    Bev.