UNSOLVED

Wadebo12

updated

18 years ago

W

Wadebo12

1 Message

0

3855

June 4th, 2008 22:00

Hard Drive Failing? Can I Backup?

I have a Dimension 4300 with Windows XP and I received the following error message upon startup:

Warning: Dell's disk monitoring system has detected that Drive 0 on the primary EIDE controller is operating outside of normal specifications.  It is advisable to immediately backup your data and replace your hard disk drive by calling your support desk or Dell Computer Corp.

F1 to Continue or F2 to run setup utility.

 

When I hit F1, it goes to another screen to choose which option to run Windows.  Every option I choose returns to the above error message.

 

I am assuming that the Hard Drive is gone, but I would like to know if there is a way to backup the drive to a new one. 

 

This drive is not the original drive that came with the computer.  I replaced the original one a few years ago, but have had no problems until now.

 

Any help is appreciated.

  • dougery

    2 Intern

    •

    89 Posts

    266

    0

    Posted June 4th, 2008 23:00

    I would stop using the drive immediately to avoid any further possible corruption.  Install a new drive, clean install your OS and programs, then hook up the dying drive externally to pull all needed data. (Bytecc offers a cool cable at a decent price to hook up externally, and it comes in really handy).

     

    http://www.newegg.com/Product/Product.aspx?Item=N82E16812156102

     

     

  • tr4

    1 Rookie

    •

    1727 Posts

    266

    0

    Posted June 5th, 2008 01:00

    Buy yourself a new drive, with many retail disks, there is a drive image program or you can acquire one seperately. You put the drive in on the empty data connector, add the new drive in bios and clone the drive. Then you remove offending drive, place the new one in its place, set bios and rebott. all done

    For best results, replace as soon as possible. But the old one may run for a long time