UNSOLVED

Martybc3

updated

21 years ago

M

Martybc3

6 Posts

0

7337

June 28th, 2005 00:00

DVD/CD Burner

Yes  i  purchased a Dell Desktop today and  i have a question about DVD/CD drives.  I purchased the Single Dvd/CD burner drive. My main question is how can i burn them with only one drive. Would i have to download them to my computer first then burn or what?  There is know where to insert the dvd or cd and thats why i am confused. Also if i have to transfer them to my computer is this a hard process to complete ?        
 
Thank you
  • crossman1

    19 Posts

    230

    0

    Posted June 28th, 2005 00:00

    The media will be copied to a temp folder on C drive that the burning software will create.  It will then be burned to the CD/DVD from that temp folder. 
  • edpro

    32 Posts

    230

    0

    Posted June 28th, 2005 01:00

    Not a difficult process at all.  In fact, depending on the software, once the CD/DVD that you're backing up has been stored in the temp folder, you will be alerted to remove the original media and insert blank media into the drive for burning.  In most cases (but once again depending on the software) the tray will eject automatically once the copy to the temp folder has been completed.

    Of course, if you don't want to burn it at that time you can leave it in the folder to burn later.  Just know where the data is stored so you can access and add it to a project later.  Most  software packages have good "how to" info.

    Message Edited by edpro on 06-27-2005 09:29 PM

  • Martybc3

    6 Posts

    230

    0

    Posted June 28th, 2005 13:00

     Is this a Long process to put it on a Temp folder? Like How long does it take to Put a dvd into a Temp folder  Seems like it would take a while is it ?
  • crossman1

    19 Posts

    230

    0

    Posted June 28th, 2005 14:00

    It definitely depends on your hardware (burner) and software, but one thing to remember;  when making  "good" quality DVD backups, speed is not necessarily what you should be aiming for.  That is if quality is important to you.

    Backing up a DVD can take as long as an hour or as little time as 20 minutes, depending on the size of the media being copied, compression and content settings, and quality of the burn.

    Message Edited by crossman1 on 06-28-2005 10:55 AM

  • Skybird

    1 Rookie

    •

    10871 Posts

    230

    0

    Posted June 28th, 2005 14:00

    You need to learn how to use the burning software that comes with the machine. 
    A disk to disk copy is an automatic process, even when you only have one drive.
    It will put the data on the hard drive as required then it will remove it when
    finished. The length of the process depends on the read speed and writing speed
    of the drive and disks. 

    Your burning software will also have other options.  For example, it will allow
    you to create a disk image to the hard drive.  This will allow you to stop the
    process after the image is created, then at some later time, you can write that
    image to a disk.  You will understand the options as you become more familiar
    with the burning software, then you will see all the processes are easy.
     
     
     
     
     
     
     
     
     
     

    Message Edited by Skybird on 06-28-2005 09:17 AM