About 4 months ago, I bought a new XPS Gen 2 that had the standard bells and whistles (3.2 EE, 2GB RAM, 9800XT, 10000rpm Twin Raptors RAID 0, XP Pro). The DVD burner that came with it was the NEC ND-2100A 8X DVD+RW. I started burning a ton of media after rigorous testing. Everything was going great. Yes, I had to wait about 15 minutes a DVD but hey, it was well worth it. I always noted the 8X speed rating of the DVD burner but did not care to upgrade it.
Well, of course times change. I knew that cutting time roughly by half (aside from lead in/out and semi-stalls) was a good thing. I noticed the firmware upgrade, downloaded it and followed the very simple "flashing" instructions. Everything seemed great. I immediately started burning my fully utilized DVD burner with brand spankin' new 8X speed rated Memorex burn media -- all the while not testing things after the upgrade (and restart).
I should have, shouldn't I? *ALL* my friends came back stating the things I burned did not work. I'm not a newb; I know what I'm doing. The strange things happened all at the same time (give or take some) on the DVD's. At first I thought: could be the media, could be burning on a overly-sustained system (no reboot in a day) or could be a fluke. So I tried to first burn on different media. Tried my "tried-and-true" Memorex *4X* again. No go. Tried Verbatim at 8X. Tried TDK at 8X. Nothing. I tried cleaning the lens with a utility found in most DVD stores. No go. I tried reflashing just in case something "didn't take". Nothing. No driver conflicts (why would there after a firmware upgrade?), no alert in any of the administrative logs -- not anything.
I then looked (out of curiousity) at the underside (burn side) of the DVD's I was burning. I noticed the 4X discs had a constant sheen to them where burned upon, and the same ol' non-burn (new) look where the disc was untouched. In other words, it looked like a good burn. Then I looked at the other (8X) burns: the first segment (outside) of the discs were constant (about an inch in thickness) and then blank -- and spotty -- almost like the corona of a sun (like an "inconsistent burn"). Weird.
Needless to say, I've spent a good deal in media -- this last run cost about $200 (150 DVD discs, CD's and the like). I'm *VERY* annoyed at what has taken place. Also, as you can imagine (name withheld) the store I bought the media from didn't think the media was bad (after a couple salesmen looked at the media and tested it [for all I know they just went in the back and looked the media]).
I've got no choice -- I have to downgrade firmware to what it was before this headache started. If I have to wait double the 8X time for a good burn -- then so be it.
My questions are: Has anyone else had this problem? Was the firmware upgrade of "NEC ND-2100A HH 8X DVD+RW" the correct one? What does the "HH" mean in the title? Is it possible that the firmware isn't fully tested? Is it possible I have a bad burner with respect to maximum burn speed? Should I just bite the bullet and get a Plextor? :)
I have an extended warranty but I *REALLY* don't want to send the computer back just for this.
Any help would be appreciated. I thank the forum members for their time.
Hi Rif, As for the warranty, Dell would send you a replacement drive or depending on the terms, have a Tech replace it for you. A few Members stated they had to re-flash the drive but this is something you have already done. Others stated the drive reverted to PIO mode after the flash. Click on the CD/RW link in my post and scroll to Section 15, articles 14 & 13 to set DMA mode. I would suggest you try Section 20, article 3 as well. I am going to mention this but state upfront to make Dell happy, "it voids the warranty on the drive", the Dangerous Brothers at the Firmware Forum have a firmware update for this drive that seems to improve reading & writing, also basically converts the drive to the NEC 2500a, as a caution, nothing in life is a 100%, except death & taxes, use at your own risk. If this is not an option for you at this time and the former suggestions did not help, then consider contacting Dell by phone and discuss the issue with them, be firm but polite, Dell may replace the drive.
Best Regards
God, grant me the senility to forget the people I never liked anyway, the good fortune to run into the ones I do and the eyesight to tell the difference. CD/RW Link
After doing some extensive research, I found the problem.
If anyone has virtual drive emulation software and attempts to upgrade his or her firmware on almost ANY DVD/CD drive, that person could go through what I'm going through. Let me explain.
Apparently, if ATAPI.SYS gets locked by virtual drive software, the throughput on *anything* CD/DVD drive related can be affected. Some users were getting one strange result while others were getting different scenarios.
I uninstalled the third-party software and everything is copasetic again.
Thank you Predator. Your DMA settings came in handy and clued me in on the start of the end of this whole ordeal! :)
Interesting. What virtual drive app were you using? I use Daemon Tools and I've updated my NEC 2500's firmware several time (forward and backward) with nary a problem. I can see your reasoning though.
Well there's no law against burning DVDs at slow speed. Heck I have an old 4x CDRW I still love because it is the most consistent and reliable CDR burner I've ever owned. I will never throw it away.
Predator
2 Intern
•
15286 Posts
392
0
Posted September 14th, 2004 00:00
Hi Rif,
As for the warranty, Dell would send you a replacement drive or depending on the terms, have a Tech replace it for you.
A few Members stated they had to re-flash the drive but this is something you have already done. Others stated the drive reverted to PIO mode after the flash. Click on the CD/RW link in my post and scroll to Section 15, articles 14 & 13 to set DMA mode.
I would suggest you try Section 20, article 3 as well.
I am going to mention this but state upfront to make Dell happy, "it voids the warranty on the drive", the Dangerous Brothers at the Firmware Forum have a firmware update for this drive that seems to improve reading & writing, also basically converts the drive to the NEC 2500a, as a caution, nothing in life is a 100%, except death & taxes, use at your own risk.
If this is not an option for you at this time and the former suggestions did not help, then consider contacting Dell by phone and discuss the issue with them, be firm but polite, Dell may replace the drive.
Best Regards
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link