UNSOLVED

_Thomp

updated

21 years ago

_

_Thomp

6 Posts

0

13177

October 18th, 2005 12:00

Dimension 9100 - Adding a RAID to non-RAID

I currently have a Dim 9100 with a single SATA drive that shipped with the machine. The computer I'm upgrading from has a RAID 0 consisting of a pair of 250GB drives, running on an Intel 865 Northbridge RAID controller. I would like to add these two drives in their current configuration to my 9100. Is it possible to have the following?

160GB SATA Drive (OS)
2 x 250GB SATA RAID

Thanks for any help/advice,

Thomp
  • _Thomp

    6 Posts

    285

    0

    Posted October 18th, 2005 12:00

    Yep, both being from Intel is the thing I'm hoping for. In the end I will be happy even if I have to reformat the RAID as long as the motherboard will support the configuration. That's a big honkin load of stuff to move over though, so I'm keeping my fingers crossed. :)

    Thanks for the info! My next question would have been about mounting the drives in the empty 3.5" bays, but you answered that already.

    Thanks!

    Thomp
  • boggsie

    13 Posts

    285

    0

    Posted October 18th, 2005 12:00

    The Dimension 9100 has two 3.5" drive 'caddies' in the bottom of the machine.  The drive from Dell takes one of these spaces.  There are also two external 3.5" drive bays.  If you don't have items in both of these bays, you can physically install the two drives.
     
    I don't know if the Intel 945 chipset in the 9100 will recognize the RAID setup of the Intel 865 NB.  I honestly doubt it, though.  You're probably aware that setting up the stripe set (RAID-0) is a combination of hardware bios and software driver configuration.  In all probability, when you setup the set in the 9100 screens, the existing data, etc. would be lost in favor of the new stripe set.
     
    This is based on my experience when trying to get sets that were setup by a vendorA or vendorB RAID card to be recognized by another vendor.  The wildcard here is the fact that both of these RAID controllers are from the same vendor (Intel). So it could possibly work.
  • rpfree

    6 Posts

    285

    0

    Posted June 20th, 2006 20:00

    Did you ever get the 3 SATA drives to work?  I'm coming to the conclusion that it may not be possible to have more than a pair of RAID SATA drives in a 9100.
  • _Thomp

    6 Posts

    285

    0

    Posted June 20th, 2006 21:00

    It does indeed work. I have 3 drives total, 2 in a RAID and 1 mon-RAID. The drives in the RAID are required to be on 2 specific SATA ports (3 and 4 I think??). Just attach the non-RAID drive to port 1 and you're set.

    Good luck.
  • boggsie

    13 Posts

    285

    0

    Posted June 20th, 2006 21:00

    Yes, you can fit up to four 3.5" HDD's in the 9100. Two will occupy the built-in trays in the bottom of the case and two will occupy the 3.5" bays that sit beneath the 5.25" (CD/DVD) drive bays. Of course, in order to use those two bays for HDD's, they cannot be occupied by FDD's or a card-reader.
  • rpfree

    6 Posts

    285

    0

    Posted June 20th, 2006 22:00

    Thank you so much for bringing me back to reality.  My not-very-technical brother had tried without sucess to add the 3rd SATA drive, and Dell was no help, telling him it couldn't be done.  I never tried the simple solution; I was working on the add-in card which I now don't care that it doesn't work.

    3rd drive works great.  Thanks again.

  • _Thomp

    6 Posts

    285

    0

    Posted June 20th, 2006 23:00

    Great! I'm glad to hear you got everything running.