The problem is two-fold. If you install the drive into your machine, and the bios does not report the full size of the drive, it does not have 48 bit LBA. If it does report the full size you're ok.
Most importantly, however, your os installation CD must support 48 bit LBA. This is true for Windows XP with Service Pack 1 or later. Given your info you are good to go on this point.
With Win XP SP-1 or later you can use the drive whether or not the computer bios supports it. The only difficulty is with utilities that use the bios routines to communicate with the drive. Windows does not use the bios once the first few sectors have been read during the boot process and most folks I have heard from seem to get along fine so long as they only access the drive with their os, or a utility that has its own 48 bit LBA capable disk driver.
Your machine has at least a chance of having 48 bit LBA. Check out this post. Fellow forum member ejn63 also recommends keeping a back-up image of the drive for emergencies, or at least of your data, in the event of problems. I think this to be good advice.
Thanks for the input and good info Jack. I guess we'll find out. I'm to pick up a couple of these drives this afternoon. The first thing I will do is boot into the BIOS, see what it reports and go from there. The machine was shipped in late 2005.
Thanks for the input and good info Jack. I guess we'll find out. I'm to pick up a couple of these drives this afternoon. The first thing I will do is boot into the BIOS, see what it reports and go from there. The machine was shipped in late 2005.
You were quite right. The BIOS reports 120GB no matter what's in there (over 120GB) but LBA is in effect so the OS hummmmmms merrily along and My Computer properties shows the full 160 minus a bit for who knows what. If someone else installs a different OS and the OS doesn't manage the LBA, that's their problem.
Works for me!!
Just got the 120Gb drives that are about to be installed. Guess that BIOS might say 120GB.... :)
The reason a 160gb drive will show as a 149gb(+ or-) is HDD MFRs use a gigabyte of 10 to the ninth , but the computer recognizes its size in digital gigabytes of 2 to the 30th power or about 1.073gb. You lose about 7% in indicated capacity. Windows OS have always shown both values on the drive's properties window
I've installed the Seagate 160gb drive on two separate D610's. On each D610 it works for awhile (couple weeks) then all of a sudden I can't boot up - I get a blinking cursor after the Dell boot screen.
I have BIOS version A06. My OS recognizes 148GB HD when it ran.
Does anyone have a solution so I can boot up these laptops without reformating/reinstalling OS?
I had the identical problem with my D600. I don't know for sure if the D610 has the same limitation, but I suspect it is the same thing from your description. The problem is that there's a 2**28 sector limit in the BIOS (~137GBytes). The BIOS and Windows don't complain, but then at some point the disk fills and "wraps" back to the start, wiping out the boot sectors, etc. The workaround was to partition into two drives: the boot drive C: is just under 2**28 sectors, and the second is a logical partition taking up the rest of the drive. The latter mounts fine after Windows has booted. I've tested this by filling it and the wraparound doesn't happen (after several months of heavy use now). So I have two drive letters, which isn't perfect, but it works well enough. Hope this helps.
jackshack
6447 Posts
401
0
Posted March 2nd, 2008 15:00
The problem is two-fold. If you install the drive into your machine, and the bios does not report the full size of the drive, it does not have 48 bit LBA. If it does report the full size you're ok.
Most importantly, however, your os installation CD must support 48 bit LBA. This is true for Windows XP with Service Pack 1 or later. Given your info you are good to go on this point.
With Win XP SP-1 or later you can use the drive whether or not the computer bios supports it. The only difficulty is with utilities that use the bios routines to communicate with the drive. Windows does not use the bios once the first few sectors have been read during the boot process and most folks I have heard from seem to get along fine so long as they only access the drive with their os, or a utility that has its own 48 bit LBA capable disk driver.
Your machine has at least a chance of having 48 bit LBA. Check out this post. Fellow forum member ejn63 also recommends keeping a back-up image of the drive for emergencies, or at least of your data, in the event of problems. I think this to be good advice.