UNSOLVED

PanosGR

updated

20 years ago

P

PanosGR

6 Posts

0

4570

September 21st, 2006 16:00

D820, cannot write dvd at all!!

hey.. i bought the d820 laptop almost 4 days ago, and i tried today to write a DVD at 8x. I created an image from a dvd to my hard drive and then i tried to write it to a TDK blank DVD-R (capable of writing at 16x). In a few seconds, when the buffer dropped for the first time the recording had failed. I tried again at 2x speed and i had the same problem.. I tried simulation and every time i had a failed recording procedure. I tried using roxio and nero 7.0.. i also tried to use some dvd-rw media but every time the buffer drops to zero the recording is failing...

Has anyone encountered the same problem? Is there anything i should do? I have noticed that i have the dma on, for the dvdrw drive...

plz help!!!
  • nkedel

    5 Posts

    184

    0

    Posted September 25th, 2006 02:00

    DVD writing software can be very fussy about other programs on the system, particularly "drive letter" writing software; if you have separate installers/CDs for Roxio and Nero, try uninstalling one. I'm not sure what the Roxio "drive letter" software is but on Nero it's "InCD" and I recommend disabling it if you don't need it.

    Also, try temporarily disabling any antivirus software or any other background processes while burning. Make sure you don't have any programs open which might be requiring the system to swap.

    I really doubt it's an issue for a brand-new system, but burning DVDs are very sensitive to disk fragmentation.

    Lastly, hardware-wise make sure DMA is on for that drive/IDE channel.