UNSOLVED

sorehead1

updated

21 years ago

S

sorehead1

32 Posts

0

1386

October 8th, 2005 23:00

4550 dvd player won't ?????

I have been working on a 4550 that has a Samsung sd-616T DVD PLAYER. The owner says it use to work but doesn't now and he's right. When I insert an dvd you never hear the player pick up speed or start as you normally might. It kinda of groans when I go into my computer and attempt to click on e drive with a dvd. I normally get a box that says insert disc. I do and nothing happens. Yesterday  the drive would attempt to start then freeze up and all the icons would disappear off the screen leaving a lovely pastoral view of ground and sky. When I went into device manager today I uninstalled it and then rebooted and let it re install which it did. Still no video operation. Plays audio and data ok. Is this a firmware problem or an application problem? Both? What would you do first?
  • Predator

    2 Intern

    •

    15286 Posts

    268

    0

    Posted October 8th, 2005 23:00




    Hi Sorehead,

    Dell does have a firmware update for this drive. I have an article from another Member on flashing the drive that you might find interesting; click on the CD/RW link in my post and scroll to Section 6-3, article 29.


    Best Regards





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link


  • sorehead1

    32 Posts

    268

    0

    Posted October 9th, 2005 00:00

    Predator, I am aware of the firmware update but very leary of giving it a try. The drive seems to work with no major problems except for the video portion. The application powerdvd even says insert disc in drive and it has a disc in it. Nice information on the website by the way. Never have tried a firmware update and need to somewhere along the way but I have spent enough time on this unit with all its other problems that have been corrected. I hate letting this get the best of me at this point so we will see what happens.I sometimes wonder if he couldn't get another dvd player that would work with out a firmware update and save a ton of headaches. Thanks for your response.

    Message Edited by sorehead1 on 10-08-2005 08:20 PM

  • sorehead1

    32 Posts

    268

    0

    Posted October 9th, 2005 00:00

    As a double check, dma is enabled. In the bios, all are set to auto. primary drive 0 is the harddrive, the secondary  drive 0 is the Samsung in the top berth, the cd-rw is secondary drive 1.
  • Predator

    2 Intern

    •

    15286 Posts

    268

    0

    Posted October 9th, 2005 00:00




    Hi Sorehead,

    Just a couple more things to try if you have the chance. We have seen issues with the drive being turned off in the BIOS, this has caused DMA problems, sound & as well as video.
    Enter the BIOS and verify that the IDE channel is set to Auto and that both drives are on. (I do not know if you have one or two or if two where the Samsung is setting, Top or Second Bay)
    Also same CD/RW link, Section 20, article 3.

    I understand the concerns dealing with a firmware update, so people are leery of it.

    Yes, for around $50 one can get a good DVD/RW and "hopefully" no headaches.


    Best Regards





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link


  • sorehead1

    32 Posts

    268

    0

    Posted October 9th, 2005 00:00

    Thanks for a reminder about the dma. I meant to check that earlier. Will let you know what I find.
  • Predator

    2 Intern

    •

    15286 Posts

    268

    0

    Posted October 9th, 2005 01:00




    Hi sorehead,

    If reloading the Secondary IDE channel does not help, one would tend to lean toward a hardware issue with the drive itself.
    If you are honestly considering replacing the drive, think again about giving the firmware a shot. I would open the case and disconnect the CD/RW drive just to be safe but that is my dime.


    Good luck..





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link


    Message Edited by Predator on 10-08-2005 10:03 PM

  • sorehead1

    32 Posts

    268

    0

    Posted October 9th, 2005 02:00

    I am confused about reloading the secondary ide. What are you referring to? If the owner decides to go with another drive I would be more than willing to do the firmware upgrade. Nothing would be lost in my viewpoint.
  • Predator

    2 Intern

    •

    15286 Posts

    268

    0

    Posted October 9th, 2005 12:00




    Hi Sorehead,

    I listed this article previously, Section 20, article 3 of the cD/RW link however never mentioned trying it, it is simply one of the standard steps in trouble shooting.
    Also I do not recall you mentioning this as well, I just assumed you had tried it, uninstall / reinstall PowerDVD, check for recent update/patches.


    Best Regards





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link