UNSOLVED

SimonSV

updated

7 years ago

S

SimonSV

5 Posts

0

2164

June 24th, 2019 11:00

Updating LifeCycle Firmware

Hi, I have a Dell PowerEdge R620 that needs its LifeCycle firmware updated. Can someone please link me to the file I need to download that I can then put on a USB drive to update the firmware? I looked at all the downloads for the R620, but the files that I thought might be the right ones are in .exe format, which doesn't seem right.
  • Daniel My

    12 Elder

    •

    6204 Posts

    1939

    0

    Posted June 24th, 2019 13:00

    Hello

    The Lifecycle Controller update is packed with the iDRAC starting with version 2.0. The update is under the iDRAC with Lifecycle controller category.

    I'm not sure if we have a DOS executable update for the iDRAC. You can use Windows 32-bit Dell Update Packages to update the iDRAC/LCC through system services(F10) or the iDRAC web server. If you have access to the iDRAC web page you can open it and go to the update section of the iDRAC. You can upload a file from your computer to the iDRAC through the browser. It will accept the Windows 32-bit DUPs, it may accept 64-bit DUPs as well. I think we were planning to add 64-bit support to the iDRAC7, but I'm not sure if it happened.

    https://www.dell.com/support/home/drivers/driversdetails?driverid=t35w2

    Thanks

  • SimonSV

    5 Posts

    1919

    0

    Posted June 25th, 2019 07:00

    Sorry, nevermind, I got it running.  I had to rename the file on the USB drive to something simple (so it can be remembered), and in that second field under the USB selection I had to type the name of the file on the root of the USB drive.  In my case it was "LC.exe" on the root of the USB drive and I typed in "LC.exe".

  • SimonSV

    5 Posts

    1922

    0

    Posted June 25th, 2019 07:00

    Thanks for the reply!

    Unfortunately, I'm not able to run the firmware update.  Here's what I tried:

    I downloaded:

    iDRAC-with-Lifecycle-Controller_Firmware_T35W2_WN64_2.63.60.62_A00.EXE

    and

    iDRAC-with-Lifecycle-Controller_Firmware_T35W2_WN32_2.63.60.62_A00.EXE

     

    I put those files on the FAT32 formatted USB drive and plugged it into the server.  I then selected the firmware update in the LifeCycle controller and pointed it to the USB drive (which was recognized).  There's another field beneath the USB drive selection field that I left blank, because I'm not sure what to put there.  I hit next, and I got a loading bar as the USB drive was searched (the USB drive has indicator light that was active).  After a while, I got an error saying nothing was found.

    Not sure if I am doing something wrong, any help is appreciated.