Macsh

updated

2 years ago

M

Macsh

1 Rookie

•

10 Posts

•

2 Points

0

436

October 8th, 2024 09:34

PowerEdge R7525 with 3 GPU cards installed power supply

Dear all, 

I am working on a PowerEdge R7525 with TWO GPUs (on Riser1A + Riser3A, by using power connectors #5 and #15), I am following this documentation, and right now it works well.

https://www.dell.com/support/manuals/en-us/poweredge-r7525/r7525_ism_pub/gpu-kit?guid=guid-56377da0-30c7-4785-8a41-847d911b4bb5&lang=en-us

I find these comments: 

NOTE: A maximum of three full length GPUs with power cables or a maximum of six half lengths GPUs are supported in a system.

I already used power connector #5 (SIG_PWR_3, GPU Power) and #15(SIG_PWR_4, GPU Power) on this document:

https://www.dell.com/support/manuals/en-us/poweredge-r7525/r7525_ism_pub/system-board-jumpers-and-connectors?guid=guid-1a4063fa-f53f-4f8e-90ce-fe498c8911b1&lang=en-us

If I want to add one more GPU, what other power supply shall I use? Is SIG_PWR_0 (Rear BP) applicable for GPU-- this connector is spare right now.

5. SIG_PWR_3 GPU power
15. SIG_PWR_4 GPU power

12. SIG_PWR_0 (Rear BP) Backplane signal and power

  • DELL-Marco B

    Moderator

    •

    3980 Posts

    0

    0

    Posted October 9th, 2024 10:18

    Hello,

    please check this page

    Dell PowerEdge R7525 Installation and Service Manual | Dell US

     

    in the images you can see that you can connect SIG_PWR_0 to the GPU3.

     

    DELL- Marco B

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    0

    0

    Posted October 8th, 2024 15:51

    Hello,

     

    Can you provide your riser configuration you have in your system?

     

    It may be best to contact Sales and they can take your criteria and supply the options available.

     

    The GPU FL kit, HL kit, and the GPU power cable kit are three different kits available for the Customer.

     

    Depending on the kit ordered, the respective components are available:

    risers, shrouds, fans, heat sinks and cables

     

    GPU kit components Page 224

    Riser and GPU slot configuration , GPU power cable matrix Pages 225-226

    https://dell.to/4eCtpdK

     

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • Macsh

    1 Rookie

    •

    10 Posts

    •

    2 Points

    0

    0

    Posted October 9th, 2024 03:37

    @DELL-Charles R Thanks a lot for the quick reply.

    I am using GPU FL kit, as mentioned, I already used Riser1A + Riser3A, I think Riser4A should be the only left option for the 3rd GPU.

    I need to confirm -- what power supply connector should I use for the 3rd GPU?

    Does #12 (SIG_PWR_0 (Rear BP))fit?

    12. SIG_PWR_0 (Rear BP) Backplane signal and power

    (edited)

  • Macsh

    1 Rookie

    •

    10 Posts

    •

    2 Points

    0

    0

    Posted October 10th, 2024 01:34

    @DELL-Marco B​ Thanks. That is very helpful!