Hello. I have a friend whose AIO 948 stopped printing a couple days ago. The jobs get stuck in the queue as "Printing" but no errors appear on the desktop or printer.
I've tried the following:
* uninstalling the AIO 948 app, removing the driver and ports from File -> Server Properties, and reinstalling using the latest driver. The installation was successful but printing still did not work.
* Updating the firmware.
This problem occurs whether using wireless networking or USB. The computer recognizes the printer because when I unplug the USB, I see that the printer goes offline, and comes back online when I plug in the USB again.
Any ideas? Computer is Windows XP Home SP3 running Norton 360 and NetNanny. (I disabled Norton and NetNanny temporarily - no difference).
Try re-installing the printer using the instructions below and see what happens.
First, let's make sure your computer has the latest Windows Updates, especially .net framework, needed to run many applications and un-install all versions of Java, restart your computer and download and install the latest Java.
I recommend that you use these Recommended Wireless Router Settings to get the best communications between the printer and all the computers.(This printer can be used wirelessly if the printer has the wireless card)
Disconnect your printer.
Download and run this patch to completely remove the printer from your computer. Run the patch(a MUST on Vista machines) untiul it prompts you to restart yopur computer.
Install the proper drivers. You'll be prompted when to connect your printer(powered on)
Please remember to install the latest firmware for the 948 Printer.
As for scanning, if you have the disk that came with the printer, then insert the Printer disk and stop it from running. Go to My Computer and double click on it. Look for the drive with the Dell disk in it. Right click on it, left click explore. Look for the OCR Folder. In the OCR Folder, there is an Abbyy Folder. right click on setup.exe, that's in the Abbyy Folder and left click run as administrator. This will install the OCR program.
Scanning
Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.
Scanning wirelessly, use the scan buttons on the printer.
I uninstalled, ran the clean up, and reinstalled, and it worked while the printer was connected via USB. When I changed the printer to wireless, however, it stopped working again - the jobs get stuck in the queue.
To use wireless, you have to setup the printer first by following the instructions below. You will most likely need to install the drivers again, choose network and follow those instructions. My guess is that you sent the print job to the printer that was connected to the USB port, but since you disconnected it, it's just sitting there not knowing what happened to the printer that was connected to the USB Cable.
Choose your printer. Beneath your printer, select your operating system. You'll be redirected to another page. Then click on show all steps. It will walk you through the installation process.
My printer quit working because the cover was ajar with the hinge spring that had popped out of place. I had to unplug everything and move the printer to figure out how to get to the spring, but once I removed it, I got the printer back in place and scanned a few things.
Then I figured out that I could not print from Microsoft Word. I could scan and save to a file, but not print from Word. I tried the steps above to reinstall the printer over and over again. Didn't work. I tried rebooting between every step, just to get it to clean up its act. Tried all kinds of stuff. Then FINALLY! It worked. I have no idea what I did that was different that it finally worked. I printed out one page out of Word that I had been sitting on for a month, waiting to get the blooming printer to work. Went to bed happy. I spent the next day happily scanning photographs. Then I found something else I wanted to print. I fired up Word and it would not print again.
The file just sits in the print queue. The only way I can cancel the print jog is to run a file called "deleteprintjobs.cmd". I haven't moved the printer. I haven't unplugged it. I haven't installed other hardware or software. It just quit working. Again.
I am about ready to buy another printer. I never had a problem until that spring popped out of position, and it has been down hill ever since.
Any suggestions before this printer becomes land fill?
Try running Delete Print Jobs to remove any stuck print jobs in the queue.
When you print from anything, like Microsoft Word, Adobe Reader, etc..., click on file, print and make sure the proper printer is selected from the dropdown menu.
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
732
0
Posted June 21st, 2009 03:00
David,
Try re-installing the printer using the instructions below and see what happens.
First, let's make sure your computer has the latest Windows Updates, especially .net framework, needed to run many applications and un-install all versions of Java, restart your computer and download and install the latest Java.
I recommend that you use these Recommended Wireless Router Settings to get the best communications between the printer and all the computers.(This printer can be used wirelessly if the printer has the wireless card)
Disconnect your printer.
Download and run this patch to completely remove the printer from your computer. Run the patch(a MUST on Vista machines) untiul it prompts you to restart yopur computer.
Restart your computer.
Download the proper drivers.
XP Drivers
Vista 32-bit Drivers
64-bit Drivers
All other drivers
Install the proper drivers. You'll be prompted when to connect your printer(powered on)
Please remember to install the latest firmware for the 948 Printer.
As for scanning, if you have the disk that came with the printer, then insert the Printer disk and stop it from running. Go to My Computer and double click on it. Look for the drive with the Dell disk in it. Right click on it, left click explore. Look for the OCR Folder. In the OCR Folder, there is an Abbyy Folder. right click on setup.exe, that's in the Abbyy Folder and left click run as administrator. This will install the OCR program.
Scanning
Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.
Scanning wirelessly, use the scan buttons on the printer.
Rick