UNSOLVED

Advanced Data S

updated

20 years ago

0

17464

August 21st, 2006 18:00

5100cn + Color Image Quality Problems

Good afternoon,  I have a 5100cn that has about 50k pages on it.  I am having problems with the image quality on color pictures in documents.  Has been working great up to this point, but now has serious issues.  I have gone into the web console of the printer, and run the "developer cleaning" for each toner cartridge, and this resolves the problem for maybe 3 more pages, but then goes right back to poor image quality.  The black print that is on the page with the color photos is great, very crisp, but the color images themselves is very poor.  All the toner cartridges have 60+ % of their capacity left in them according to the web console.  Any ideas on what the problem could be?
  • 861

    0

    Posted August 22nd, 2006 00:00

    The images almost look like they are lower resolution.  There isn't really any bleeding.  I guess that fuzzy would be the better of the two descriptions of those two.  Again, i tlooks like it is a low resolution picuture as opposed to a higher resolution picture.  If the transfer roller was the problem, wouldn't cleaning the developer not resolve the problem for a little while?  Is there something that I can check out to rule out the transfer roller being the problem?
  • grcooperjr

    174 Posts

    861

    0

    Posted August 22nd, 2006 00:00

    Hi There

     

    Enlighten me on poor... Ie: fuzzy. colors bleeding....

    The reason I ask is most of time that I have issues with color it is because the transfer roller is starting to get full. When this happens it wont scavange the waste tone correctly and The colors start to bleed. Also when you do the devloper cleaning routine. It puts a lot of waste in the transfer roller hopper. If you are carefull you can split the hopper on the roller and empty it...

     

    Ray Cooper

  • grcooperjr

    174 Posts

    861

    0

    Posted August 22nd, 2006 01:00

    Nope.. if anything it would make it worse if the hopper in the transfer roller was close to full. When you clean the developer it takes the toner that it has flushed thru the head to clean it and puts it in the transfer roller hopper. That's one of the reasons in the instructions they tell you to do the cleaning routine sparingly. The first time i did the cleaning , it only took 2 times to fill the hopper. Of course I bought a new one for $24.00 and then found that i could empty it myself..

    I don't know what to tell ya. I've never had the problem described on my 2 5100cn's

     

    Ray Cooper

     

    Message Edited by grcooperjr on 08-21-200607:38 PM

  • 861

    0

    Posted August 22nd, 2006 02:00

    Thanks for your help.  I have tried the developer two times now.  I will make sure that I keep the hoper clean myself.  Hopefully I can get some type of response from the Dell mediators here soon.
  • 861

    0

    Posted August 23rd, 2006 04:00

    I am assuming that you already have looked at: http://support.dell.com/support/topics/global.aspx/support/dsn/en/tree?c=us&cs=04&journalid=677A7E99326811DB889461A8695983E9&l=en&s=bsd&treeid=E1A19B402FC1A275E030A68F272829CE

    If not, see if any of that helps. Also, when was the last time you replaced the drum cartridge? If the drum is near the end of life, or past that, it is going to affect the quality of the print outs.

    If it was the transfer roller, you should be seeing the same degradation on all 4 colors (including black.

    Hope this helps.
  • 861

    0

    Posted August 24th, 2006 20:00

    I was thinking of purchasing the Dell 5100 cn from the Dell Outlet for $499.00.  I am looking for advice on it's quality of print and reliability. Please email me with your knowledge. I will be primarily printing property flyers and reports for my clients and need great looking photos and graphs.    Thanks....
  • 861

    0

    Posted December 6th, 2006 16:00

    Don't buy it, Dell has not been very helpful with their products when it comes to printers. I ran through their extensive troubleshooting process, and we pinpointed the exact output problem, only to be told my warranty had expired....Leaving me completely hanging and not telling me what the problem was....
     
    By the way, if anyone knows what is the problem that would be nice to know. I have the 5100cn and have poor color output with full toner cartridges. To be exact, output error 15, when I print my pages in Black it comes out perfect, but when I do color, all or most of the colors are very light, almost non-existent.....
  • chriswag

    4 Posts

    891

    0

    Posted January 18th, 2019 15:00

    Hello

     

    I am having the same exact issues. Dell tech support **bleep** and only wants to charge me for tech support on phone from some foreign country.. What worked for you to fix the fuzzy image in color?? Thanks

  • chriswag

    4 Posts

    889

    0

    Posted January 18th, 2019 15:00

    I am having the same exact issues. Dell tech support **bleep** and only wants to charge me for tech support on phone from some foreign country.. What worked for you to fix the fuzzy image in color?? Thanks