
UNSOLVED
Precision 7510, upgrade to 3rd party BOE NV156FHM-NY1?
Hello. I have a Dell Precision 7510, non-touch, FHD 1920×1080, currently using the original 30-pin FHD eDP display cable (WV3CV / AAPA0). I want to replace the factory 60 Hz panel with a BOE NV156FHM-NY1, which is a 15.6-inch 1920×1080 144 Hz 30-pin eDP panel.
Can you confirm:
Does the Precision 7510 motherboard/display controller support a 120 Hz or 144 Hz internal LCD through its 30-pin eDP connection?
Is there any BIOS/firmware restriction that prevents using a third-party 120/144 Hz 30-pin eDP panel?
Is the original WV3CV/AAPA0 30-pin FHD cable electrically suitable for this type of panel?
If the panel is physically compatible, would Dell BIOS/firmware prevent it from operating at 120/144 Hz?
I understand that Dell did not officially sell the 7510 with a 144 Hz internal display. I'm specifically asking whether there is a hardware or firmware limitation preventing a third-party 144 Hz panel.
(edited)
Responses (1)
Solutions (0)

ejn63
12 Elder
•
31844 Posts
•
156262 Points
4
1
Posted September 19th, 2026 11:19
Unless you can verify that the system shipped with the screen you're looking into buying, it most likely will not work.
Notebook firmware is coded to recognize the display ID (EDID) of the panels the manufacturer included with the system model line -- anything else won't be recognized properly (if at all) and is unlikely to work (again, either completely satisfactorily if at all).
You can try - but realize that most sellers won't take back a display panel once it has been shipped.