UNSOLVED

rathje40

updated

9 years ago

Closed

R

rathje40

10 Posts

0

807

May 24th, 2018 13:00

Precision 7510 sometimes loses Display Port after sleep

I have a Precision 7510 running Windows 7. The BIOS and all drivers are up to date. I have two Dell P2715Q monitors daisy-chained using the onboard Display Port. The laptop is connect to an E-Port 3 for power, LAN, and USB  (but not the Display Port). At the end of the work day, I sleep the laptop and disconnect it from the monitors. The next morning, I reconnect the monitors and unsleep the system. 80% of the time, this works fine. The other 20%, the system no longer sees the Display Port. I have been unable to find any way, other than rebooting Windows, to get it back.

Ideally, I'd like to eliminate the problem altogether, but I'd be happy if there were a way to get the system to see the Display Port without having to reboot.

This conversation is no longer open for comments or replies and is no longer visible to community members.

  • rathje40

    10 Posts

    627

    0

    Posted August 1st, 2018 09:00

    I have discovered a partial solution to this problem. While I still have to reboot the system if it loses track of the display port, I am able to prevent it from happening in the first place. If I turn the first monitor in the daisy chain off and back on (bringing it out of sleep mode) before I unsleep the computer, it sees the monitors every time (so far).