is it possible to run two RX3080 GPUs in a T5820 with a 950W power supply? The GPUs consume ~240W each, so the 950 watt power supply should actually be enough if you use Y-cables to connect both GPUs with 2x8 pins. But I'm still not sure, so I'd rather ask in advance.
A stock RTX 3080 FE will use 320W under full load. Most other cards come with a factory overclock, that can push the power draw to around 400W
Dell lists the maximum supported GPU configuration and 600W total or 2x 300W cards. I'm going to guess that your computer comes with 2x 8 pin GPU cables (with a 2x 6pin adapter plugged into each 8 pin) Your RTX 3080 cards will either have 2x 8 pin connectors each. (FE cards have a 12 pin with an adapter that uses 2x 8 pin connectors)
Any way you look at it that machine will only support a single RTX 3080. On a side note, these Precision towers are designed with "Blower" style Quadro cards in mind.
Not sure about V7594 950W psu. I think you need 1300W PSU to run 2X RTX 3080
Ask @DELL-Chris M what the power supply options are and have him include the cable options for the video cards.
If you have 625W or 825W power supply its definitely not supporting 2 X 300W cards.
It takes 2 SIX PIN connectors to make ONE 8 Pin Connector.
Number of PINS DOES NOT MEAN PLUG IT ANYWHERE YOU WANT AND FORCE IT IF IT DOESNT WANT TO GO IN.
CPU connectors are NOT GPU connectors.
They are keyed to prevent this mistake but some users FORCE it in and DESTROY everything in a FRY and DIE motherboard gpu FIRE situation. SMOKE BANG POOF! and everything is dead.
Note the number of 12v Wires for ONE 8 pin PCI-E power connector.
If you have 2 x 375w video cards it takes Four SIX PIN connectors into 2 adapters for dual 6 pin to 8 pin PER RTX 3XXX video card with DUAL 8 pin to MINI 12 pin connector. So you would need Eight SIX PIN connectors to go into FOUR DUAL 6 TO 8 ADAPTERS for 2X RTX 3080 cards. Tapping power using sata or other connections or doubling up connectors to get more DOES NOT ADD MORE POWER to your power supply and IS NOT SAFE from a fire safety standard. UL94V fire safety spec is VERY specific.
This has nothing to do with the power supply watts has to do with fire safety for 18 awg wire and molex connectors.
12v 18 amps is a hard limit for the 4 wires on any connector.
12v 6.25 Amps is the rated spec for ONE six pin connector.
12v 12.5 Amps is the rated spec for ONE 8 pin connector.
The T5820 came with one RX3080 and two 8 pin GPU cables from our Dell supplier (I disconnected the left GPU cable to take some pics).
I have limited the GPUs to a maximum of 240 watts. The question I have is, could I power an RX3080 with a single connector on the PSU if I use a 2x8 pin Y cable?
GPU cable on PSU side (on GPU side cables are standard):
I'm caught up to speed on this thread. I am also trying to run dual 2080ti cards in a dell 5820 with a 950w power supply. I will be using this strictly for gpu based LLM inference, so CPU usage is negligible.
On page 117 of the owners manual, it says that PCIe slots 2 and 4 are 300w capable, and 250w each if using more than one MEGA.
Soo... if i use a splitter on the current 2 x 8 PCIe power, so each card is getting 2 x 8PCIe at 75w each plug, 150w, per card... shouldn't this be ok if the power draw of each gpu is 250w?
JamesJAB1
2 Intern
•
217 Posts
3036
1
Posted July 31st, 2021 09:00
A stock RTX 3080 FE will use 320W under full load. Most other cards come with a factory overclock, that can push the power draw to around 400W
Dell lists the maximum supported GPU configuration and 600W total or 2x 300W cards. I'm going to guess that your computer comes with 2x 8 pin GPU cables (with a 2x 6pin adapter plugged into each 8 pin) Your RTX 3080 cards will either have 2x 8 pin connectors each. (FE cards have a 12 pin with an adapter that uses 2x 8 pin connectors)
Any way you look at it that machine will only support a single RTX 3080. On a side note, these Precision towers are designed with "Blower" style Quadro cards in mind.