UNSOLVED

MarkDymond

updated

8 years ago

0

1148

November 1st, 2018 03:00

RAID 1 drive disappeared in OMSA

Hello

We have a PVNX3000. It contains six disks. Two are RAID 1 for the OS and four are RAID 5 for data.

History: a few years ago one of the RAID 1 drives went south and entered a 'degraded' state. Dell sent a replacement disk which was a larger size and from a different manufacturer. This resulted in the RAID 1 array functioning fine, but the new disk was flagged as 'degraded'. A Dell technician remoted onto the system and confirmed this was something that could be safely ignored.

When checking the status of the drives via OMSA this week I saw that one of the RAID 1 disks was not listed. I checked the server and the light on the missing drive is not lit. The replacement drive is fine - it is still present and still flagged as degraded. However, I would have expected the other drive to be listed even if it was defective: unless it has died completely? My experience with RAID is limited so I don't really understand the implications.

Will I be able to replace the disk that has disappeared and have the RAID 1 functionality restored? OMSA shows the rest of the hardware is fine - everything else has a green tick. It is just the 'alien' disk that is flagged as degraded that OMSA is not happy with.

Any help will be appreciated.

Thanks.

  • DELL-Sam L

    Community Manager

    •

    8148 Posts

    •

    34709 Points

    1017

    0

    Posted November 1st, 2018 07:00

    Hello MarkDymond,

    It is best to check the controller log for your PERC card to confirm that the drive has failed. If the drive is failed, then you can get a replacement drive & insert it into your NX3000 so that it can rebuild.  Here is a link that shows how to get the log if needed. https://www.dell.com/support/article/us/en/19/sln249450/how-to-export-the-tty-perc-controller-log-via-openmanage-server-administrator-omsa-?lang=en

    Please let us know if you have any other questions.

  • 968

    0

    Posted November 6th, 2018 06:00

    Hi, Sam

    Thanks for replying.

    I have exported the log and have gone through it. It looks as though the drive may have gone south quite some time ago. I don't really understand the log entries but can see the following:

    T167: DM_AddDevice: NO DEVICE FOUND devId 116 to ff devHandle f ScanDevice 842639a0
    T167: DM_DevSSUCallback: DevId x0001 errCount 0 Retry 0 Status 2
    T167: DM_DevSSUCallback: SENSE Len 12 ResponseCode 70 senseKey 6 asc 29 ascq 0
    T167: DM_DevSSUCallback: DevId x0002 errCount 0 Retry 0 Status 2
    T167: DM_DevSSUCallback: SENSE Len 12 ResponseCode 70 senseKey 6 asc 29 ascq 0
    T168: DM_DevSSUCallback: DevId x0003 errCount 0 Retry 0 Status 2
    T168: DM_DevSSUCallback: SENSE Len 12 ResponseCode 70 senseKey 6 asc 29 ascq 0
    T168: DM_DevSSUCallback: DevId x0004 errCount 0 Retry 0 Status 2
    T168: DM_DevSSUCallback: SENSE Len 12 ResponseCode 70 senseKey 6 asc 29 ascq 0
    T168: DM_DevSSUCallback: DevId x0005 errCount 0 Retry 0 Status 2
    T168: DM_DevSSUCallback: SENSE Len 12 ResponseCode 70 senseKey 6 asc 29 ascq 0
    T168: devId 1 - slot num - 1
    T168: devId 2 - slot num - 2
    T168: devId 3 - slot num - 3
    T168: devId 4 - slot num - 4
    T168: devId 5 - slot num - 5
    T168: DM_DevNotifyRAID: Notify Done. Check for Removal
    T168: DISM Complete
    T168: gDevInfo=842360a0, size=160
    T168: Total Device = 6
    T168: PD Flags State Type Size S N Vendor Product Rev P C ID SAS Addr Port Phy DevH BFw BRev
    T168: --- -------- ----- ---- -------- - - -------- ---------------- ---- - - -- ---------------- ---- --- ---- ---- ----
    T168: 1 f1400005 00020 00 3a38602f 1 1 0 ATA TOSHIBA DT01ACA0 A750 0 0 01 4433221106000000 04 06 0e NA NA
    T168: 2 f1400005 00020 00 74706daf 1 1 0 ATA WDC WD1002FBYS-1 0C09 0 0 02 4433221105000000 01 05 0b NA NA
    T168: 3 f1400005 00020 00 74706daf 1 1 0 ATA WDC WD1002FBYS-1 0C09 0 0 03 4433221104000000 03 04 0d NA NA
    T168: 4 f1400005 00020 00 74706daf 1 1 0 ATA WDC WD1002FBYS-1 0C09 0 0 04 4433221103000000 02 03 0c NA NA
    T168: 5 f1400005 00020 00 74706daf 1 1 0 ATA WDC WD1002FBYS-1 0C09 0 0 05 4433221102000000 00 02 0a NA NA
    T168: 20 01400005 00020 0d 0 0 0 0 DP BACKPLANE 1.07 0 0 20 5b4ba0b00a922a00 00 08 09 NA NA
    T168: 100 00400005 00020 03 0 0 0 0 LSI SMP/SGPIO/SEP 2514 0 0 ffff 0 00 ff 00 NA NA
    T168: 116 00000005 00020 1f 0 1 0 0 0 0 00 4433221107000000 00 00 0f NA NA

    I assume the '----- --- --' entry relates to the missing drive. This appears near the start of the log (I searched for Toshiba and this is the first instance).

    The controller looks as though it is fine.

    My fear is that the card itself may have become faulty. Do you know if there is a way the drive connector on the card can be checked?

    Thanks.

     

  • DELL-Sam L

    Community Manager

    •

    8148 Posts

    •

    34709 Points

    966

    0

    Posted November 6th, 2018 08:00

    Hello MarkDymond,

    I will send you a private message so that you can send me the controller log.

    Please let us know if you have any other questions.