roger001

updated

10 years ago

R

roger001

18 Posts

0

1067

August 2nd, 2016 08:00

Rebuild/Rebalance Traffic

This is our current environment:

ScaleIO v2.0-6035.0

Windows 2012 r2 datacenter

vcenter 6.0.0, 3634793

(4) esxi 6.0.0 3620759

How do I verify the rebalance/rebuild traffic uses a specific vmic5 and vSwitch1? 2016-08-02 09_51_33-Terminals 3.6.1 (Files store).png

  • pawelw1

    306 Posts

    601

    1

    Posted August 5th, 2016 05:00

    Hi Roger,

    If you use IP Roles, check what IPs are set for SDS-only and then check whether appropriate vNICs are assigned to the ScaleIO-Data2 Port Group.

    You can also try to run some rebuilds and monitor pNICs activies on ESXi level - either with "esxtop" or "esxcli network nic stats get -n vmnic5" on that box.

    Hope that helps!

    Best,

    Pawel

  • roger001

    18 Posts

    601

    0

    Posted August 5th, 2016 07:00

    esxtop works perfect!

  • roger001

    18 Posts

    601

    0

    Posted August 5th, 2016 07:00

    Were do I find info about the IP roles; can I assume the user guide? I will go look. Thanks./

  • pawelw1

    306 Posts

    601

    0

    Posted August 7th, 2016 23:00

    Hi Roger,

    Yes, the IP roles are described in the User Guide under Architecture/Networking section.

    cheers,

    Pawel