I have this server dell poweredge T610 with 8 disk on raid 5 configured for 1 virtual disk.
All of them 250 sata, one of them failed, and i'm not able to find one of the same size to replace it. Is it possible to replace it with a large one? maybe on 500 gb?
And do i need to turn of the server in order to perform the rebuild or reform? not quick sure which of the process to use.
Thanks for your question. You can always go same size or larger when replacing a failed drive in an array. You will want to do this under power, unless the drives are cabled. Hot swap the drive and the rebuild process should begin.
Thanks for your suggestion. I replaced the defected disk, the disk now appears on OpenManage as Ready. Guess i have to execute the assign global hotspare task on this disk?
DELL-Geoff P
990 Posts
883
0
Posted July 5th, 2013 08:00
Thanks for your question. You can always go same size or larger when replacing a failed drive in an array. You will want to do this under power, unless the drives are cabled. Hot swap the drive and the rebuild process should begin.
Regards,