UNSOLVED

gmichael225

updated

3 months ago

G

gmichael225

1 Rookie

•

1 Message

0

5097

September 29th, 2007 01:00

Poweredge 2450 - Can't Install Server 2003

Hi there,
Something is really wrong with my Poweredge 2450.

When I try to install Server 2003, by the obvious method (booting from CD using its automatic startup), I get an error meassage: "txtsetup.sif is missing or corrupted. Status 1024." NB: This is a copy of Server 2003, not a Microsoft Original.

When I try to install XP Professional, certain files appear to be missing from the CD. I recieve error messages requesting that I redirect setup to a different location. THe files are primarily .dll and .dl_ (compressed .dll) files.

I have tried more obscure methods of installing Server 2003:
- Running "winnt" from the "i386" folder of the setup disk. This appeared to complete, yet the Hard Disk failed to boot the next stage of Windows Setup.
- Creating a virtual machine, and copying the hard disk image before the computer starts up and detects the machine's hardware, and using "dd" to extract the image to the Poweredge's hard drive. This failed because "dd" is designed for use in Command Prompt. I then tried using a win32 extension for DOS to run "dd", which also failed due to the nature of "dd" and the win32 extension.
- Burning a copy of a Server 2003 .iso. I didn't bother to try installing from this, as the desktop I was using to burn the disk reported the disk as corrupted during Data Verification.
- Installing over the LAN. This failed beacuse the DOS client application required me to know what NIC I had, or have NDIS 2.0-compatible drivers for it.

Also, at some point, I remember a setup utility crashing with an error message that my BIOS was not "ACPI compliant". I have flashed the BIOS using a floppy to revision A09, the latest currently available version. The error message also suggested that I "Press F7 when prompted for storage drivers." This advice failed beacuse I wasn't prompted for storage drivers. At the base of the screen, during setup, at the "Press F6 If you need to install 3rd-party SCSI or RAID drivers", I tried pressing F7; I also tried pressing F6 at that point, then pressing F7 at the resulting screen, which gave me the option of specifying SCSI or RAID drivers. Both had no result.


This is getting really annoying now and any help is appreciated. I just want to get this thing running, so I can configure it properly.


Michael G
  • 92

    0

    Posted October 1st, 2007 19:00

    gmichael225,
     
    I have seen errors like this when there is a bad memory stick.  I would remove all add-in cards and all memory except one stick, and try.  You can also use a memory test program like memtest to determine this.  If you have already done this, please let me know.
     
     
    Regards,
     
    Dave