bseklecki_ge

updated

3 months ago

B

bseklecki_ge

1 Rookie

•

60 Posts

•

22 Points

0

332

June 9th, 2026 06:19

NetXtreme-E firmware update v36 ; updated driver v236 prerequisite required?

It is surprisingly rare and exceptional that a firmware update has a driver update prerequisite.

That appears to be the case with NetXtreme-E firmware v36.11.xx

The firmware release notes ambiguously indicate a driver version minimum, but it is not clear:

"- Windows driver 233.0.148.0 cannot start with firmware 36.11.56.00."

https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=mj0ht

"This release should be used with the Broadcom NetXtreme-E 23.6 device drivers."

I'm rather sure that Windows Server 2025 (LTSC , 24H2) RTM image contains driver version [ v227.0.125.0 [ 2023-07-18 ] ] , or earlier, in theory, making an incompatibility for 17th gen hardware shipped after 2026-05 that contains this update from the factory?

Waiting to test/confirm this.  In my limited availability testing, with the older driver, the NIC is detected, but the link status reflects down.


~Brian

  • DELL-Josh Cr

    Community Manager

    •

    9790 Posts

    •

    45217 Points

    0

    1

    Posted July 7th, 2026 16:17

    Hi.

    Thank you for your question.

    Yes, it seems like you are correct about the minimum driver version.

     

     

     

    Let us know if there is anything else we can assist you with.

    Thanks,

    Josh

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

    #Iwork4Dell

  • bseklecki_ge

    1 Rookie

    •

    60 Posts

    •

    22 Points

    0

    0

    Posted July 19th, 2026 07:08

    So an RTM Windows Server 2025 Image from Microsoft will be incompatible with 15-16th-17th generation Dell/EMC PowerEdge hardware using NetXtreme-E NICs with updated firmware from the factory.

  • DELL-Sam L

    Community Manager

    •

    8147 Posts

    •

    34706 Points

    0

    0

    Posted July 22nd, 2026 17:07

    Hello bseklecki_ge,

    You would need to check the support guide for each server that you have to be 100% sure that it is not supported.