T320 Server with PERC H310 won't boot after a power outage
Hi, any help would be greatly appreciated. We had a power outage, UPS did a gentle shutdown. However after power was restored, the T320 can't find it's boot drive. the RAID 5 drives are visible on the controller, but system says no boot drive was found.
@DELL-Young E After further troubleshooting I discovered that the server originally only had a S110 controller with 4 RAID5 1TB drives. Those were also the boot drives. The PERC H310 was added later to support additional storage. Currently the server only sees the H310, not the S110.
@DELL-Charles R Yes, it was a simple case of the CMOS battery being too weak, and all the settings went to default. We changed the ACHI to RAID, and then told the boot to go to those RAIDS. System came online.
DELL-Young E
Moderator
•
5421 Posts
•
37 Points
0
0
Posted February 3rd, 2025 07:08
Hello, you can check if iDRAC is reporting any hardware events. if no hardware events and iDRAC can see PERC and VD, then may need to fix OS issues.
Respectfully,
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!