
UNSOLVED
PB
Paul Bassett
1 Message
0
26527
September 27th, 2004 12:00
SNMP info from PERC controller
I am trying to get a variety of information from our numerous Dell PE 2550s to be presented in our SNMP management program (AdventNet OpManage). I have the MIBs that are supplied by Dell including Arymgr.mib and Perc.mib (although I am unsure which is needed for info from the Perc3Di controller). Using Getif (SNMP util) I am alble to load alll these MIBs and get all sorts of useful data on temperature, fans, power redundancy etc but cannot get any information whatsoever about what is going on with the Perc. OpenManage tools are installed on the server to be monitored so I can see the data I need when logged on locally but I cannot get any Perc data remotely.
Any ideas?
Cheers,
Paul
Responses (1)
Solutions (0)

tnetjpm
37 Posts
436
0
Posted September 29th, 2004 07:00
Hi Paul,
arymgr.mib provides detailed information about storage hardware components and RAID configurations monitored by the Array Manager agent.
PERC.mib provides detailed information about SCSI storage hardware components and RAID configurations monitored by the PERC Console Package software agent. The PERC Console Package monitors the hard-disk drive subsystem(s) of servers installed with PERC, PERC 2/SC, and PERC 2/DC. (Legacy)
So you shouldn't need the PERC.mib
What information is it you are trying to obtain ? Please give specific examples.
Thanks.