UNSOLVED

stu2077

updated

18 years ago

S

stu2077

14 Posts

0

10801

June 26th, 2008 17:00

SAS5iR virtual disks

I have a PE860 with two SAS drives.  I want to mirror both drives and have two virtual disks.  Is this possible with this controller?  Yes, I rtm but it's not much help. 
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    145

    0

    Posted June 27th, 2008 12:00

    The SAS5iR supports raid 0 (striping (no redundancy) and raid 1 (mirroring).

    So to which step did you get here under the "Create new virtual" disk section?

    Edit: Check Gary's post here. It's a different server model, but the exact same SAS5iR.
    Message Edited by Dev Mgr on 06-27-2008 08:29 AM
  • stu2077

    14 Posts

    145

    0

    Posted June 27th, 2008 17:00

    Creating the mirror is not hard at all.  I suppose I didn't explain myself very clearly.

     

    I want to mirror the two drives, but, instead of using the full size of the two drives, create two virtual disks on those two drives.  I can't find an option to change the size of the virtual disks.  My question is, can it be done with this perticular perc controller?

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    145

    0

    Posted June 30th, 2008 14:00

    The SAS5iR is a simple raid controller. I'm not 100% sure, but I strongly suspect that it can't do multiple virtual disks on a set of harddrives.