ChepeSDsga

updated

2 years ago

C

ChepeSDsga

1 Rookie

•

4 Posts

•

2 Points

0

698

May 25th, 2024 22:09

PowerEdge R740 H740p Firmware.

Hi to all maybe there's some one that still have the firmware for the PERC controller H740p mini 50.5.0-2819 or later, since in page of dell drivers is no longer available.

And I have a  f/w is in fault state - MFI register state 0xF0010002

Thanks for the help.

Regards,

  • ChepeSDsga

    1 Rookie

    •

    4 Posts

    •

    2 Points

    0

    0

    Posted June 9th, 2024 01:25

    @DELL-Chris H​  Hi finally i buy a new PERC, reset the BIOS and finally started to work again.

    Only is there any way to flash the PERC board because i really think is not burn It only has a broke firmware.

    Thanks to all for the support.

    Regards,

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted May 27th, 2024 07:16

    Hello thanks for choosing Dell and welcome to our community.

    This could help, please have a look.

    PERC H740P/ H745 RAID Controller Firmware 51.16.0-5150

     PERC H740P/ H745 RAID Controller Firmware 51.16.0-5150 | Driver Details | Dell US

     

    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • ChepeSDsga

    1 Rookie

    •

    4 Posts

    •

    2 Points

    0

    0

    Posted May 27th, 2024 19:14

    Hi thanks for the link and I try it with that exe and receive the following error.

    Thanks,

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted May 28th, 2024 02:08

    Hello, I also recommend trying this:

    https://dell.to/3Ki0rSL

    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • ChepeSDsga

    1 Rookie

    •

    4 Posts

    •

    2 Points

    0

    0

    Posted May 28th, 2024 14:14

    Thank you very much for your help, I already reset to default IDRAC 

    But still facing the same issue 

    Thank you and regards,

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    0

    0

    Posted May 28th, 2024 14:30

    Would you confirm a couple of things for me?

     

    What is the OS installed on the server? 

    Are you able to access the H40p controller bios and see the Virtual and Physical disks?

    If you boot to the Live ISO found here, and run the update found here. Does it allow the update to succeed? 

     

    Let me know. 

     

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted June 10th, 2024 09:52

    Hello if you are asking for a way to flash PERC board without getting into RAID controller, I'm afraid there is none.
    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • AmadorIII

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted April 9th, 2025 18:24

    @ChepeSDsga​ I had to download the last revision SAS-RAID_Firmware_F3J22_WN64_51.16.0-4076_A16_01.EXE and update with that. Even after getting on the last revision I still get the same error you are receiving.

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted April 10th, 2025 01:39

    Hello, AmadorIII
    I don't seem to have enough information to figure out what your issue is in detail, unless you already resolved by replacing the PERC. If you still need help, let us know what you are going through. You can send us your service tag through https://www.dell.com/community/en/direct-messaging as well.
    Resepctfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!