Client has a PowerEdge 840 and the Raid controller has failed. The part is E2K-UCS-51 (B).
Can I get the part from Dell directly?
When swapping it out should I take out 1 of the drives (they are mirrored) before installing replacement controller?
If this does not solve it can I take the drive out. They are Hard Drive, 160G, S2, 7.2K, 8M Unleaded, Seagate-Tonka and read them using an external adapter connected to another live machine, if so what kind of adapter will I need? In other words can I connect something usb to a working machine and plug in the drive and read the data off of it?
Geoff P-Dell
13 Posts
193
0
Posted December 20th, 2012 06:00
This part, the SAS 5/ir, is no longer available through Dell. However, you can locate it here:
http://www.impactcomputers.com/un939.html
Replace the controller, the configuration should remain on the drives for the RAID 1 and should boot up.
Let us know if you need additional assistance.
Regards,