UNSOLVED

BEPCWaco

updated

20 years ago

B

BEPCWaco

2 Posts

0

6853

April 19th, 2007 14:00

which slot is Bank 1 DIMM B in Poweredge 6400? Mixing brands in same bank?

We have a recurring critical error on my poweredge 6400/700 system OpenManage:
 
Status Critical
Device Name BANK_1/DIMM_B Size 256 MB
Type SDRAM-SYNCHRONOUS Speed 7 ns
Failures Single bit warning error rate exceeded
Single-bit failure error rate exceeded
 
Question 1:
I got the following service manual but it doesn't tell whether the B slot is the top one in the pair or bottom one. I bought a matching DIMM and plan to replace just this one module.

<ADMIN NOTE: Broken link has been removed from this post by Dell>

 
Question 2:
Do I need to replace all four modules in the bank, even though the replace module is of the same specs (PC133 ECC SDRAM, 256MB)? If the replacement module comes from a different manufacturer, will it still work with the other three? I don't see why not but want to make sure.
 
Thanks a lot!
  • eagle0468

    26 Posts

    214

    0

    Posted May 6th, 2007 23:00

    DIMM B is the top one in the pair, if you are going from the board connection.
     
    What you should do first is swap DIMM 1_A with DIMM 1_B and see if you still get the errors.  If the error follows the DIMM replace it.  If the error stays with the slot you have a bad board.