The PERC battery maintains the data in the PERC memory when powered off.
If the battery fails then the PERC automatically goes into Write-Through mode.
Typically the PERC is in Write-Back and data is passed to the PERC to write to disk.
In Write-Through data is written direct to disk and is not held in memory.
It typically would not fail the controller as it puts the controller in write-through regularly when it does battery relearn which it does every 90 days.
DELL-Charles R
Social Media and Communities Professional Dell Technologies | Enterprise Support Services #IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!
That sounds like the PERC battery. The battery goes through learn cycles every 90 days by default. The battery will drain and then trickle charge when this happens. If it is going through a learn cycle or if power was disconnected from the system then a low battery status may be normal. I would give it ~8 hours to charge to see if the battery status goes to normal.
I don't know if we sell the battery any longer. The PERC 5i, 6i, and H700 all use the same type of battery. I think we changed the battery after the H700. One of the part numbers for the battery is NU209.
After replacing the battery, do I need to do anything for the server to recognize the new battery? I don't have "OpenManager Server Administrator" installed.
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
0
0
Posted June 21st, 2024 18:22
Hello,
The PERC battery maintains the data in the PERC memory when powered off.
If the battery fails then the PERC automatically goes into Write-Through mode.
Typically the PERC is in Write-Back and data is passed to the PERC to write to disk.
In Write-Through data is written direct to disk and is not held in memory.
It typically would not fail the controller as it puts the controller in write-through regularly when it does battery relearn which it does every 90 days.
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!