
UNSOLVED
R630 does not seem to be posting DS0 and DS6 blinking
I found a similar issue to mine here https://www.dell.com/community/en/conversations/poweredge-hardware-general/r630-will-not-power-on-led-ds0-and-ds6-blinking/647fa2b9f4ccf8a8de8561d8
but it was from 2023 so I did not want to bring up an old post
I am trying to get an R630 working with 2 CPU. Just like the other post DS0 and DS6 is blinking, DS3 is solid.
I have tried pulling out any cards, disconnecting much of the front panel, and trying different RAM configuration.
The only thing I have not tried yet is pulling out the CPU's but I have been reluctant to do that and hoping that is the last resort.
The only other symptom I have noticed is that when I plug in the power the Information button on the front panel will briefly be blue and then turn off. The power button never turns on, but that could be cosmetic so not sure if actually a symptom or not.
iDrac is inaccessible, my router does not report it connected and the front panel is not on. I am just trying to figure out if there is realistically anything else I can try before I pull off the CPU?
1 person also has this problem
Responses (1)
Solutions (0)

DELL-Young E
Moderator
•
5421 Posts
•
37 Points
0
0
Posted April 24th, 2026 00:18
Hello ninjon, do you have a service tag you can share? You can DM us here https://www.dell.com/community/en/direct-messaging.
Respectfully,
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!