PowerEdge R740xd stuck at boot after RAID to HBA mode conversion -
Metronome.efi crash
What I was trying to do: Convert drives from RAID mode to HBA (IT) mode for use with MAAS (Metal as a Service) provisioning. The goal is to have the controller in pass-through mode so the OS can see individual drives.
Steps taken:
Entered PERC controller BIOS during boot
Cleared foreign configurations on all drives
For one server: Changed controller mode from RAID to HBA, scheduled for next reboot
For other 3 servers: Manually converted individual drives from RAID to Non-RAID, then scheduled controller HBA mode for next reboot
Rebooted all servers
The Problem: All 4 servers are now stuck at boot with the following error visible in iDRAC virtual console:
Additional symptoms:
Servers display "System has critical issues" on health check
Servers were attempting PXE boot (for MAAS) but now completely frozen
Cannot boot into OS or reach PXE
iDRAC is accessible, virtual console shows the above crash
Physical drives show as "Ready" or "Non-RAID" in iDRAC storage view
The current situation is that the PERC is still in the RAID mode and 10 disk are in NON-RAID mode and others are still in RAID mode...
I can't even change the NON-RAID drives to RAID mode or anything else the server is frozen,
I have 3 servers which are in the exactly same state(mentioned above) and 1 server where all the drives are in NON-RAID mode but the PERC is still showing it self in the RIAD mode.
To confirm if the issue is caused by the controller card or the drives, can you try removing them out from the server and try to turn on the server to access the BIOS. Then try installing just the controller card without drives.
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.
Hello, Unfortunately, there is no fix that can be guaranteed to work 100% without physical troubleshooting. Hardware issues can only be isolated by testing components step by step. Without on-site checks, we can suggest best‑practice actions, but a 100% certain solution is not possible. Best regards,
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Erman O
Moderator
•
2984 Posts
•
14874 Points
0
0
Posted March 27th, 2026 13:08
Hi,
I thought its like the system crashes in UEFI (Metronome.efi / Avago SAS driver) before PXE or OS handoff, so everything appears “frozen”.
Just an idea to quick fix:
After this, the system I would expect boots normally and PXE/MAAS works.
Hope that works!
DELL-Erman O
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!