BSmithMI

updated

5 months ago

B

BSmithMI

1 Rookie

•

2 Posts

•

7 Points

0

245

June 25th, 2026 16:20

PowerEdge C6100 0x5NT7 RAID BBU bracket and right side rackmount ear assembly

Hello, I wanted to find out if there is a way to locate/acquire the metal bracket which holds the LSI RAID controller backup battery unit, two Dell part numbers on the bracket are:
0x5NT7
and:
CN-0x5NT7-74752-33D-0RQF-A00
I needed to locate eight of these.  They fit on the front of the server node sled which contains the interface to the server chassis backplane.  The 2U overal server chassis which holds four nodes has two part numbers PEC6100 or XS23-TY3.

I'm also looking for the right-side rack ear modules as a few of mine are damaged.  I was able to scour ebay and found this:
https://www.ebay.com/itm/201794431630  but I don't think it's correct.  It looks like this is a kit which contains the left ear but the right side ear is blank.  Auction title says this is for the C6145 but that's not the actual server chassis I have.  

If anyone has ideas or insight that would be super helpful, thanks!


  • Dell-Martin S

    Moderator

    •

    3883 Posts

    •

    25810 Points

    0

    0

    Posted June 30th, 2026 06:41

    Hi,
    should be Dell V0VPW" Right Rack Ear Assembly (With Electronics) or "Dell W5G28" The Left Rack Ear Assembly (Structural Handle).

    with kind regards Martin/ Liebe Grüße Martin

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

    DELL-Martin S

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell


  • Dell-Martin S

    Moderator

    •

    3883 Posts

    •

    25810 Points

    0

    0

    Posted June 29th, 2026 06:07

    The part number 0X5NT7 (or simply 5NT7 in Dell's 4-character alphanumeric syntax) is the correct part number for the metal mounting plate designed to seat the LSI battery backup unit onto the physical node tray.
    Because you need eight of these brackets, individual component listings will be tough to track down. Use these strategies to secure them:
    • Search for standard Dell Part Number variants: Drop the "0x" prefix entirely when querying inventory engines. Enter it into aftermarket wholesale engines as "Dell 5NT7" or "Dell 05NT7".
    • Search for complete "BBU Kits" instead of bare metal: It is exceptionally rare for teardown liquidators to unscrew the metal bracket from the battery assembly. Most liquidators list the entire kit under the primary battery or cable part numbers. Look for listings labeled "Dell C6100 RAID Battery Kit" or "Dell C6100 LSI BBU" and message the sellers to confirm the metal retention bracket is included in the bundle.
    • Contact Sales to get theright parts if you want a 100% supported configuration

     

    https://www.ebay.com/itm/201794431630 do not buy it. On the C6100 / XS23-TY3, the Left Rack Ear acts as the master control interface. It features the actual hardware logic, front power button matrix, status LEDs, and a specialized internal control ribbon cable. The Right Rack Ear is effectively a "dumb" structural blank piece of steel used purely to latch the server into the cabinet threading.

     
     

    with kind regards Martin/ Liebe Grüße Martin

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

    DELL-Martin S

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell


  • BSmithMI

    1 Rookie

    •

    2 Posts

    •

    7 Points

    1

    0

    Posted June 29th, 2026 16:50

    @Dell-Martin S​ 
    Excellent, thanks for the pointers!  Would you happen to know the exact Dell part number for the right rack ear for the C6100 2U chassis, or the part number if it's sold as a pair?  That part has been difficult to research and locate, I suspect because of its age.