UNSOLVED

Chaser2004

updated

20 years ago

0

5038

October 9th, 2006 20:00

PowerEdge 2300 errors

I got the below erors after running diagnostics on the server.
1. The ESM2 System Board Sensor check failed with "MB Fan 0 RPM sensor.." error
2. The ESM2 Backplane sensor checked failed with "BP disk drive 1-4 states sensor ...." error.
3. The System Board Fan Test failed with "System Fan(s) RPM below minium" error.
 
Just wonder I got the error #2, because of the System Fan problem and that will go away if the system is replaced.
Or if it's unrelated to the system fan, how could I fix it?
Thanks...
  • speedstep

    11 Legend

    •

    46969 Posts

    78

    0

    Posted October 17th, 2006 01:00

    You can get a new working refirb 2300 server for $50 or so on ebay.

    PCretro also has them VERY inexpensive.

    http://www.pcretro.com