SATA Drive Will not Permit Write After PCIe SSD install
Dell OptiPlex 7040 Small Form Factor
After install of SSD 1TB PCle 3.0x4, NVMe M.2 2280, Internal Solid State Drive and made it the boot drive C original C drive SATA SSD is now G but will not permit writing to
Try change that to AHCI, save changes, exit bios. Do a clean Windows install on the new nvme ssd which is your boot drive. You can wipe the original sata ssd and use it as a secondary data drive.
I was mistaken when i stated writing to G was not permitted . i now noticed it is permitted but only w/ administrator privileges e.g. each time I save a file to G from a text editor in particular BowPad an administrator privileges window pops up . This of course is inconvenient and prevents automatic operation such as utilizing G as an automatic scheduled mirror of C . i set SATA Operation to AHCI w/ same effect as described above so i set it back to RAID . i do not wish to do any OS installs .
This type of issue could have happened if you introduced 2 bootable drives into your system. A simple solution is to perform a clean (erase all partitions) using diskpart, then initialize and format using disk management. But if the drive contains data and just needing to get automatic access, you can right click on drive G and select properties => Security tab => Advances, and editing permissions to take over the ownership. It is not recommend if you are unfamiliar with these settings.
Yet the issue, so it may show own by system but with a (previous) different system ID. If drive G has data on it, consider to make backup externally and formatting the drive to fix the issue.
BernardIE5317
1 Rookie
•
10 Posts
264
0
Posted January 9th, 2023 19:00
Thank You for Your Kind assistance
I did not alter BIOS : Settings : SATA Operation : RAID On
It remains as shown here