UNSOLVED

Adventurer007

updated

8 days ago

A

Adventurer007

1 Rookie

•

12 Posts

0

2771

February 28th, 2021 07:00

Optiplex 7060 dimm slot 4 and PCIe network card

I have a Optiplex 7060 fitted with,

2x 16GB in slots 1,2

2x 4GB in slots 3,4

It works fine until I install a PCIe network card Broadcom BCM5719 quad-port. The system will not post, with error LED 2,7 indicating Memory SPD failure.

Through trial and error, this problem will go away when I remove the dimm in slot 4.

I have tried changing the order of memory sticks, nothing works. It has been consistently I have to remove dimm slot 4 to get the PCIE network card running.

So I can't fault dimm slot 4, also can't fault PCIe slot. They just won't work together.

This is so weird, like some kind of hardware limitation ???

Regards.

  • DELL-Cares

    Moderator

    •

    27843 Posts

    •

    745 Points

    1621

    0

    Posted March 1st, 2021 01:00

    We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • Adventurer007

    1 Rookie

    •

    12 Posts

    1613

    0

    Posted March 1st, 2021 03:00

    I have further information to add to this.

    Today I managed to borrow a PCIe Sound blaster audigy.

    All 4x dimm slots works fine with the Sound blaster.

    Therefore this is pointing to some compatibility issue between 7060 and Dell broadcom BCM95719 quad port card 0TMGR6 and the painful workaround is remove the dimm in slot 4 which reduce the system memory capacity.

     

  • speedstep

    11 Legend

    •

    46969 Posts

    1611

    1

    Posted March 1st, 2021 04:00

    Pairs are not slots 1 2 3 4

    White Ears should be 1  then 3

    Black Ears 2 then 4

  • Adventurer007

    1 Rookie

    •

    12 Posts

    1608

    0

    Posted March 1st, 2021 04:00

    Slot 1 white - 16GB

    Slot 3 white - 16GB

    Slot 2 black - 4GB

    Slot 4 black - 4GB

    This combination works fine. Until I try to install the Dell broadcom PCIe network card.

    System will not post unless I remove Slot 4 black - 4GB

  • msiegen

    1 Rookie

    •

    3 Posts

    1362

    0

    Posted February 12th, 2022 19:00

    Has anyone found a solution for this?

    I have an Optiplex 7060 with 4x 8GB DIMMs installed. This works fine.

    I then installed an Intel X710 NIC, and now the system won't post. Same 2,7 LED code as OP. If I remove the DIMM in slot 4 the system boots up just fine and recognizes the NIC.

    I'm running the latest available BIOS and also the latest NIC firmware. Any ideas for what to try, or am I just out of luck for this combination?

  • Adventurer007

    1 Rookie

    •

    12 Posts

    1348

    0

    Posted February 13th, 2022 03:00

    Dell didn't admit the problem.

    Last year they fob me off by saying the memory are not Dell memory. I'm not stupid enough to buy new Dell rebranded memory to prove a point.

    As long as a NIC card, so far tired Intel and Broadcom cards, is installed in the PCIE slot and memory slot 4 is in use, it will not POST.

    You're better off rearranging your memory mix not to use memory slot 4. Dell is a brick wall, pathetic customer service that won't (or not paid enough to) engage internal engineering, use excuses such as non Dell branded memory.

     

  • msiegen

    1 Rookie

    •

    3 Posts

    1337

    0

    Posted February 13th, 2022 15:00

    I got my machine working with a NIC and 4 DIMMs. At the suggestion of Dell support I tried swapping the NIC. Mind you, I started this upgrade with a known-good NIC, but I guess I'll try anyway... and sure enough, success!

    Both of my NICs are X710-DA2 based.

    • The incompatible NIC is a Dell OEM card, p/n 0Y5M7N with firmware version 

      8.40 0x8000af82 20.5.13.

    • The working NIC is an Intel retail card with firmware version 

      8.50 0x8000b6ed 1.3082.0.

    The Dell NIC works fine in a Supermicro motherboard, also with 4 DIMMs. So maybe there's something going on between the Dell BIOS and Dell NIC firmware.

  • GERHCO

    1 Rookie

    •

    4 Posts

    1201

    0

    Posted April 24th, 2022 09:00

    Hi,

    same strange problem here with a DELL T40. Latest BIOS. If all 4 DIMM-Slots are populated the machine wont start with some PCIe cards present. Power LED blinks (2,7 aka SPD error).

     

    system PowerEdge T40 (095B)
    memory 64KiB BIOS
    memory 64GiB System Memory
    memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n
    memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n
    memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n
    memory 16GiB DIMM DDR4 Synchronous 2666 MHz (0.4 n

    NOT working cards are:

    - DP/N 00FCGN - 2 port DELL NIC BCM (latest FW)

    - SAMSUNG MZPLJ3T2HBJR (NVMe SSD 3.8TB)

    Cards mentioned above are WORKING if DIMM slot 4 NOT populated.

    NIC "INTEL Ethernet Controller 10G X550T" is working fine wit all DIMM slots populated.

     

    Strange behaviour. No explanation from DELL.

  • MrPoppet

    1 Message

    491

    0

    Posted May 2nd, 2023 06:00

    Same problem occurs in the HP world (In a HP ProDesk 600 G5 and in a HP EliteDesk 800 G4).   4 x 16G in 4 DIMMs.   Insert a BMC5719 Quad-port NIC into any PCIe slot in the PC and DIMM3 is no longer functional.   No response from HP and no identifiable work around except remove the memory from the slot with the conflict.   Could be an issue for Broadcom to fix.

  • lm123456

    1 Rookie

    •

    2 Posts

    4

    0

    Posted October 27th, 2023 21:08

    I just got an optiplex 7070 MT.  I have the same issue.  4 16g dims work fine.  but insert an intel X550 10g network card; it fails power up.  Pull dimm4; it works with the network card.  everything is up to date; intel 10g card is retail; with the latest firmware