Truemobile 1400 and 1450 having problems connecting with Linksys BEFW11s4 v.2
and WRT54G routers
HI all,
I see several thread about issues with Truemobile cards connecting with Linksys routers and I'm wondering if anyone has been able to come up with a concrete solution?
I have tried a TM 1400 and 1450 mini-pci running the latest drivers against both my Linksys B and G routers and I have aregular dropped connections and little to no range. The experience with the B router is next to useless. If I am connected my computer starts to respond very slowly. I have regular dropped packets pinging just the router itself. This is within 6 feet range of the router.
I also have a WRT54G router and the experience is somewhat better, but still pretty regularly I will lose my association and Windows still sees the signal with "Good" or "Very GOod/Excellent" signal strength. I have set it to G only. I have tried with and without WEP with similar results to the B router. With WPA-PSK and AES encryption I tend to hold the association a little longer, but if I am more than 15-20 ft away (with line of sight) I will get Wireless Connection is available and no association.
I uses Sysinternals Process Explorer and it seems that the Hardare Interrupts peak during a lot of these issues. Unfortunatley that is at far as that troubleshooting has gone.
Keep in mind that this same combo works great at the office with a Cisco 1200 series AP with 802.1x and WPA encryption settings with almost zero connection drops in 4 months of use. I have tried older versions of TM drivers and the latest.
I can't fathom why interop testing between the largest computer manufacturer and one of the largest AP manufacturers has failed to show this during testing and nothing has been done to resolve it ... especially after regular posts of this problem in the forums and calls to support.
Anyone's help is appreciated. I would rather not have to go buy another brand router when everything about it works well and both work with 2 other laptops quite well.
I am having the same issues with a new 9100 and the Truemobile 1350 with a LinkSys WRT54G. Dell has already sent me a replacement Ethernet Adpater and when that did not work I requested a replacement 9100. If they cannot get it to work correctly them I am going to return the laptop and purchase a different brand.
Like you I do not understand how they did nto catch this issue before now.
Dell replaced the 9100 and the latest 1350 Adapter has better speed 48 to 54 within 10 feet of the router but is still has the signal quality issues. I still have a open case with them and will continue to find a solution.
They all seem to have a "stock" answer.
1. Update the router firmware.
2. Re-configure the router
3. Power Down and reset the router
NOTE TO ALL DELL SUPPORT PERSONNEL: The only computer that has a problem connecting to the Linksys routers are YOURS !!!! I have a IBM Thinkpad that works fine Speed of 54 and Excellant signal at a greater distance than the Dell 9100.
They did indicate that the True Mobile Adapters use the "Long Preamble" and the Linksys uses the short version, however they were not able to explain how to change the Linksys WRT54 to match. I have a call into Linksys since I cannot find this setting anywhere in the router.
The BEFW11S4 router I mention has the preamble type set to Long by default. This setting isn't visible in my configuration of the WRT54G router so I'd be interested to know what is turned up from you convesation with Linksys.
This is NOT a signal quality issue and IS a compatibility issue between the TM adapters and LInksys routers. I've used my laptop with wireless on many different brands of routers at many locations in my travels and the only brand I consistently have problems with is Linksys. I have also used other WLAN NICs on those same Linksys routers with ZERO problems!
Dell support needs to stop putting their head in the sand and pointing fingers and realize that something in the driver or implementation of the TM cards is not compatible and work with Linksys and its customers to resolve it. Sending out new hardware is not the answer because it is the same TM cards with the same end result.
Signal quality issues are caused by metal near either router and/or notebook, and/or RF interference from other things radiating at 2.4ghz near your wireless equipment, including a 2.4ghz cpu.
I was having connection problems with my TrueMobile 1450 and Linksys WRT54G. Upgrading to the latest firmware v2.04.3 which came out July 21 2004 fixed all my conectivity issues.
Thanks Fred! I've upgraded the firmware on the G router and I will post my experiences to see if it helped.
I've also noticed that released new firmware for the BEFW11S4 router and though it says April 15, this is quite new to the site as I've been there since and not seen this upgrade.
Hi - My wife and I have two Latitude X300's - mine is slightly older and has Truemobile 1400 - that has always worked very well with our Linksys WRT54G router - I'm able to go all over our house with it and it still works at considerable range - I was and am very impressed. More recently we got a second X300, this time equipped with Truemobile 1450, but that seems to work much less well - it does not seem to have the range of the first computer, and the connection often breaks, which is very rare with the first computer. It does seem strange, because presumably the 1450 is an improvement on the 1400. I'm not very technical, so I guess I'll follow Fred's suggestion and try upgrading the router's firmware on the newer computer, but if anyone has any further advice or suggestions I'd be very glad of them (it seems to me to be more a problem with the Truemobile 1450 than with the router).
johnallg
2 Intern
•
7280 Posts
637
0
Posted July 15th, 2004 02:00